Search results for query: *

I have problems with one phone x110 the msg light and feature light are blinking all times, the screen have the VM on but there are no message on the that box, I also check with coosesions if any one have that extension as second message light notification, no luck on that. Some help. Thanks

Hi to everyone. I have a problem changing a 3905 of TN XXX to 3902 using same TN XXX. I did a in LD20 put OUT TN XXX then NEW with Type 3902. but not working, now 3902 in TN XXX, I'm misssing something? system ver 4.5 I haven't playing with Option 11c for long time, any help Thanks Note: I...

I have a Legend 7 system w/ MM 007 that I installed 2 PRIs, the PRI circuits are fine it just that the customer used to have notification to their cell, after they get messages, but now with this PRI installation some how that stop working, their pools are 899 PRI 1 and 898 PRI 2, the ARS start...

I have this problem and it reads 255 times, also I checked the list of events and alarm and is not there, help! MICS 5 /PRI

Hi, every one this is new for me, I got an MICS 5.0 w/ PRI one card and every thing is normal, except for calls are coming at same time on the pri circuit, I mean more that 23 calls at the same time the system goes weird, all phone rings, the display flash, etc and no calls can be answered at...

Hi, I got a MICS 5.0 w/ PRI, so far every thing looks fine, my routes are fine, destinatin code also fine, and calls are going out, but some time I notice that only one chanel will be in use and maybe two chanel and when another call is place on the pri it shows "no free lines", or...

This is my problem, I have MICS 5.0 and ASM for 8 analog station. every thing works fine, but if we want to use any of the analog ports to forward the calls to another set, the flash or link doesn't work.I can make and receive calls I mean the analog port works, ok but we can't do eny of the ata...

Hi, I have two ASM and the are working fine, is just that I want to know is is posible to set DND on the analog station and how,the other thing is how U emulate the link button on new STL phones (with flash button?) I trayed but doesn't seem to work with the other features. My system is a MICS...

I traying to program this MICS 5, using the NRU but evry time I need to adquire the system info to the Workbook, It displayed the map file (Aoc03ENG.map )is not the same as (Anc02eng.map). the last one is the system map that I'm getting, I need the .map or any .map for Ver. 5 up Thanks in advance.

Hi, everyone. I have an MICS 4.0,with PRI. I'm thinking to upgrade the software to a 5.0 or up, can I do this without losing the PRI code?. Thanks

I have an USA MICS-XC 4.0 with T1 I will go to PRI but some one toll me that this Ver. doesn't works good with PRI, anyone knows about it. Thanks

hi, my problem is with this T1, doesn't have ring back and the carrier said that this have to be done from the pbx. I'm not sure about this. the config is: t1 esf 8bzs answer Disa N Auto answer: Y WINKSTAR E&M CHANELS CONFIG WE RECEIVE INCOMING CALLS AND WE CAN DO OUTGOING CALLS, BUT NO RING...

I, HAVE A MICS W/ T1 CARD CONFIG: LINE: E&M FRAMING: ESF SIGNALING: 8ZBS PUSE TYPE: DTMF ANI: YES DNIS: YES T1-TWO WAY-INBOUND AND OUTBOUND THE INCOMING IS FOR 1800 NUMBERS ONLY ALL OF THIS MATCH THE CARRIER, AND I CAN DO INCOMING AND OUTGOING CALLS, BUT THE PROBLEM IS WHEN CALLERS DIAL ANY OF...

Hi, I have a MICS 4, w/ T1 card for inbound/outbound on longdistace service, we can make outgoig calls, Ok but on incoming calls, we have 21 (800) coming to it, the T1 channels are config to E&M, winkstar, and we are receiving the DNIS(last for digits of each 800)the target lines 145 up are...