Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
router recommendations
Can anyone recommend a cost efficient router with a minimum of 3 ethernet ports? The router will be used to connect 2 lab segments to the existing corporate network. Thanks -D- DTrix
- Thread
- Replies: 4
- Forum: Technical certification and testing
-
LAN Router
Can anyone suggest a cost efficient Cisco router with a minimum of 3 ethernet ports? The use of this router will be for 2 labs connected to the corporate LAN. Thanks in advance -D -
Debugging Command
Which debugging command allows me to view what packets are going through the PIX showing the following information: Source IP Destination IP Source Port Destination Port Thanks! -D- DTrix
- Thread
- Replies: 0
- Forum: Security, hacker detection & forensics
-
Stuck in rommon
I currently have a 2600 which I cannot get out of rommon mode. I try confreg 0x2102 but I get this error: device does not contain a valid magic number boot: cannot open "flash:" an alternate boot helper program is not specified (monitor variable "BOOTLDR" is not set) and... -
broadcasts
Does anyone know how a pix would handle a broadcast from the inside network to the DMZ? Thanks in advance! -D- DTrix
- Thread
- Replies: 1
- Forum: Security, hacker detection & forensics
-
NT Domain Controller
Good day all, I was wondering if anyone could explain why I am having an issue with finding the Domain Controller during netlogon. I have a WINS server in a DMZ which I have successfully joined the NT Domain in the Inside network of the PIX, however, my success ends there. I can: Ping the...- DTrix
- Thread
- Replies: 3
- Forum: Security, hacker detection & forensics
-
debug ppp negotiation
Hi all,<br><br>I'm trying to debug ppp on 2 ciscos. This is the output from my debug:<br><br>PPP protocol negotiation debugging is on<br>2d01h: Se0/0 PPP: Phase is TERMINATING<br>2d01h: Se0/0 LCP: State is Closed<br>2d01h: Se0/0 PPP: Phase is DOWN<br>2d01h: Se0/0 PPP: Treating... -
Access lists
When configuring an Access List Rule to an interface the syntax is:<br><br>ip access group NUMBER {out¦in}<br><br>What I am not clear on is the "OUT¦IN" portion of the command. It appears that the command specifies the interface is either used for inbound OR outbound...
