Search results for query: *

I am not a phone guy or anything and looking for a place to see what the pinouts should be for a rj11 jacks if I want to wire a simple loopstart line or DID. I know they only involve two wires, but on which pins to they go on one of those rj11's. I know you voice guys are laughing, but a web...

Have a Linksys WRT55AG on a working static IP internet DSL connection. Can serf the web all day long with pc connected to the Linksys. Getting and internal IP of 192.168.1.something from the Linksys and it all works fine. But when I try to use my corporate SecureID token to create a vpn IPSEC...

Know how to lower the voice storage (audio) no problem, but text storage is in the 90's % and need to lower that. Any ideas?????????????????????????? It's a MM 12.10

There is a parameter under Profiles Branch Office under the group Connectivity settings when you click on the 'configure' button to the right of /base group. Under Connectivity there is a Bandwidth Policy section where you set the Committed Rate and the Burst Rate. It is a drop down menu...

I have a nm-1T3/E3 module in my 2851, but cannot figure out how to configure the darn thing. Anyone done one similar? When I do a sh run I see two tunnel interfaces (tunnel1 and tunnel3) but can't figure out what on earth to do with them. Any clues? Thanks.

I need to set up a distribute list between multiple sites involving multiple PBX's. How do you do that? Some place that has a doc on how to do it or can someone explain it fairly well? Thanks

First, I am wanting to know what I can look at to see if a Meridian PBX/voice mail is AMIS capable, and secondly, when is there a white paper or something that spells out how to do voice mail distribute lists?

I have an internal dialing plan where you dial 8 and seven digits to dial internal between sites with the first 3 of those digits being site specific. For example, 8-200-1000 calls our headquarters site and 1000 is the operator. And that is an SPN in all the remote sites that is set up so that...

I have a T1 between an Opt 81c and an Opt 11 that shows to be idle and no alarms, but it will not allow calls, and I keep getting these errors filling up the screen concerning it. DCH: 50 MAINT INDICATION TIME: 14:52:22 COUNTER VALUE 2 2 3 2 6 7 10 255 18 59...

I have Contivities and I was told by Nortel support that you can mutlinet with 6.0 code, but I have not been able to get it to work. Multinetting is setting up two separate ethernet subnets off of the fastethernet interface of the contivity. Prior to 6.0 code you could only have one subnet...

I did a dsch L C on 8 channels on a particular Loop. Then I went to ench L C on those channels and they won't idle up. They end up in Lock out. What can I do to idle them up? Appreciate it.

We have about 65 sites with branch office tunnels to our central core site with 1010's at all of the remotes. We are also looking at implementing Cisco Call Managers and IP Telephony. My question is whether the 1010's can fully support the IP phones and QOS functionality. Hate to think we...

I need to install a remote shelf about a 1/4 mile away. I have fiber between the two sites ready and waiting and have an expansion cabinet. Does anyone know what the part numbers are for the Fiber Receiver card for the remote shelf and the daughterboard that goes on the main cabinet's SSC...

Actually two questions: 1. If I have an Option 11 voice mail sitting in my lab that I want to send to a site and install because they all of a sudden are in need, am I going to run into issues with site IDs and what not with Nortel? 2. Without burdening you all with spelling out all the...

I have about 50+ 1010 Contivities that I need to be able to access via the web via a control tunnel. I have set up a Profile/user account with rights to manage the box, but when I attempt to use my Nortel client and come in via the web I always get 'remote host not responding'. Nortel support...

I have a site connected back to a hub location that I am having a problem getting the lamps to light when VM messages are left. Both sites have Opt11's, but only one has a MM. There are PRI tie lines between the two sites and the lights used to work fine until the remote site bit the dust and...

I am trying to determine the correct length of the FLEN in my SPNs. I have SPNs set up for our internal 7 digit dialing plan. Our AC2 is 8 and that gets us to our SPNs. For instance, one of sites is SPN 755 and the users dial 8+755+XXXX to get someone at that office. Under that scenario...

I have a 2950 switch that I want to create two vlans on and put the first 12 ports in vlan 67 and the last 12 in vlan 68. I want to connect the switch to my 2951xm router and trunk the two vlans across the link. I have created the vlans, put the ports in the appropriate vlans with these...

The default username and password is 'admin' and 'setup', and I have one that someone changed the password to something else I cannot figure it out to save my life. Without being able to get into it, does anyone know how to reset the box to factory defaults? Thanks in advance.

All the manual says is that it is a 'threshold' of some kind. I know you set this in the DDB in Ld 73 and then again on loops you create in Ld 17, but I am clueless as to why. I have always been told around our company to set it to '00' and was curious what some here have theirs set to and why.