Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
proliant 3000 not Posting
I have upgraded the system board in my proliant 3000 and now it will not start. I noticed that there is an amber light on the board with the marking CR713 under it says VAUX. When i hit the power button all seems to get power some of the green LED's on the board light up and the raid board... -
VRM's
I have been going nuts with a problem. I had an older proliant 3000 motherboard -SP#306561-00132CAE1JG895G. I could not get 2 processors to work in it. I then upgraded the motherboard to-P26A3ANK3J807J. I tried to use the VRM's and used a matched pair or PIII 450's. the VRM's were... -
2nd processor in prolaint 3000
I have been going crazy to fix this issue and would appreciate any help. I have a Proliant 3000 and have installed a 2nd processor. It works fine when each is is installed seperatly. When I boot with both it gives me me an error 212-processor 2 fail & 178-invalid configuration. I dont know what... -
Microsoft Security Patch
I have a proliant 3000T /333 its running windows NT4 server SP6a, IE6 and I had updated the Security rollup patch from microsoft. The computer will not load now. It shows a Disk I/O error and i had updated the cpqarray.sys driver and still it is not loading up. if anyone has ideas on how to get... -
Proliant 3000/333 upgradeable?
I am new to setting up a server from scratch. I have a proilant 3000 /333 for test purposes. I wanted to know if it was possible to change the processor from PII333 to a PIII and what it would entail to do so. I also wanted know about setting up a duplex raid and if that was possible with the... -
Proliant 3000 T /333 Raid array help
I have a Proliant 3000/ 333 with a 2/P controller and have 8 4.3 gig drives in the array cage. I have green lights on all of the drives, except the one in the upper left corner. I cannot see the drive when setting up the raid array. When i move the drive to any other spot it turns green and...
