Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
1811 Downloads Fail, RST inside window, stray segments?
Im having an issue with alot of my sites with RST inside current window and Stray Segment errors It is making all applications send alot of retrys and preventing downloads from finishing. Seems to have something to do with the CBAC of http and https tcp packets. I have tried various things, and... -
2811 and 2x HWIC-4ESW
I have a 2811 with 2x HWIC-4ESW's. The seond 4ESW doesnt seem to work right. I read a bit about having to stack the modules but that seems crazy to have to waste 2 ports of the 8 i wanted. I dont need both switch modules to act like 1 8 port switch, every port of the modules has their own vlan... -
1811 making 100mb of dns requests an hour
I have a Cisco 1811, w 12.4(6)T5 ios on it, and i have the appfw configured to block yahoo, msn, aol and such. I found that the router is making tons of dns requests for the urls specified in the appfw config. Anyone else find this issue? or know how to stop it? Just the dns traffic uses about... -
1841 w/BRI, ISDN line not quite working. PPP Issue? DDR?
Well I have a Cisco 1841, and a BRI card hooked up to a ISDN line. The line tests fine according to the telco, and it is up with correct SPIDs(as per below) Isp is QWEST.NET, and they dont know much about ISDN at all. The problem is, It does the dialing, connects, then 10 seconds later drops... -
Here is my problem. IOS: c2600-i-mz
Here is my problem. IOS: c2600-i-mz.121-3.T.bin Cisco 2611 Dual Ethernet Router. 8mb Flash, 32mb Ram. Ethernet0/0 exists and gets and ip via dhcp ip = x.x.x.x sh dhcp lease Temp IP addr: 68.147.174.101 for peer on Interface: Ethernet0/0 Temp sub net mask: 255.255.254.0 DHCP Lease server... -
IOS should fit in Flash
Problem is that router says image wont fit in flash Image is: c2600-jsx-mz.122-8.T.bin Flash: 8,388,608 bytes total ImageSize: 7,405,568 Bytes Diffrence: 983,040 Bytes Why does the router say it doesnt fit? Via TFTP if that makes a diffrence - Bill -
Routing and Forwarding by Interface name not working
Cisco 2611 Dual Ethernet IOS ver: 12.1(2)T Features: c2600-i-mz.121-2T Flash: 8mb Ram: 32mb Heres my problem Commands like: ip route 0.0.0.0 0.0.0.0 Ethernet0/0 and ip nat inside source static udp 192.168.0.2 6112 interface Ethernet0/0 6112 extendable Dont Work. The first one is accepted... -
DHCP and Routing Question
Hi there, I have a Cisco 2611 Router and this line will not work. ip route 0.0.0.0 0.0.0.0 Ethernet0/0 ^ Error at ^ Marker. Cant use the mac address either. I want to be able to use names/mac address because my IP changes about once every 2 months and its a pain to... -
HTTP_POST_VARS vs _POST ?
Can someone tell me why I shouldnt be using the HTTP_POST_VARS and HTTP_GET_VARS and such like that? Would my way be more Global? as in works across more versions of PHP or not? -
Routing Help
Ok, I found a config to enable my 2611 to route the cable modem to my internal network. Everything works, it gets the dhcp address, it assigns them. But it doesnt route. I cant even ping outside addresses from the router. Here is the config -=-=-=-=-=--=-=-=-=-=- ! [---Begin Config---] ... -
Cisco 2600 Loading IOS onto it
Hi There, I have a Cisco2611 Router with 32mb of ram. My router has NO IOS on it right now, All I can use is Rommon. When I try to load my IOS onto it (10mb IOS) the TFTP just stalls and times out. Does anyone know how to fix this? - Bill -
Cisco 2611 Router IOS
Hello, I recently purchased a Cisco 2611 Router off of ebay. I found out that the router has no IOS on it, someone has deleted it. I can get into rommon and have it connect with my tftp software but I need the actual IOS Image so that the router can be used. Please do not ask me to do a...
