Search results for query: *

Hello, I used to work on Hicoms years ago. I am looking for the manuals for the Hicom 300, 300 E and the Manager. Anyone with the manuals or info that can help would be apreciated. Thanks Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone...

Can anyone tell us the required settings or able to check their Hipath 3000 Manager settings: Options/Program Options/Communication Settings menu for the following: What option should be selected under Modem Settings/Modem Type. We are using an external us robotics 5686 .v92 modem to dial out...

I need to remote login to a Hicom 150 PBX that is connected t the PSTN (public network) with a dial up modem. I have Procomm Plus on a PC with Internet connectivity, as well as Skype phone service over internet (digital). I do not have a POTS analog line to use though. I would like to find...

I need to remote login to a PBX that is connected t the PSTN (public network) with a dial up modem. I have Procomm Plus on a PC with Internet connectivity, as well as Skype phone service over internet (digital). I do not have a POTS analog line to use though. I would like to find out if there...

Can anyone send me links to all the manuals and reference/user guides for the Phonemail systems that work with Hicom 150? Thank you in advance Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

Our Siemens support engineer cannot access a Hicom 150 E remotely anymore, it was working great for a couple of years. She had dialed a phone number which I presume activated an internal modem to answer to administer the system. I have logged in through Hipath Manager to locate the modem...

Does anyone know if the Hipath 3000 manager E admin software will work on the Hicom 150? Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

Hi, Does anyone know if the the TN 762, TN 762Band 7300, and 9000 series wireless sets require any additional hardware or software for installation? I found the Avaya "minimum vintage guide" which states they wont work in a G6540 nor with CM6 or greater. However are there any options that need...

Anyone have any infi and/or commands used to set up an MCI link on the 2000 IPS? Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

Any information on the hardware & software/option requirements to get a MCI link working on the 2000 IPS? Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

If we have 2 CS1000s connected via a T1, can one phone set the MWI on a phone on the far end. Lets say they are both set up with ARS. thanks, Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

If we have 2 CS1000s with SW version 5.00 on them, connected via a T1, can one phone set the MWI on a phone on the far end. Lets say they are both set up with ARS. thanks, Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

If we have 2 3300s connected via a T1, can one phone set the MWI on a phone on the far end. Lets say they are both set up with ARS. thanks, Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

If we have 2 S8500s with COmm manager 3.0 on them connected via a T1, can one phone set the MWI on a phone on the far end. Lets say they are both set up with UDP. thanks, Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

The merlin legend that went down in my other post is now working thanks to replacing all the boards. The merlin messaging board akso went down from the short so we replaced it as well, but used the same flash card from the old merlin messaging board they had. The merlin messaging card is now...

We put a mlx 016 card into the expansion cabinet while it was still powered up. Thefifth trace up ftom the bottom of the connector sparked and their is tiny scorch mark on card and slot trace. When the system is powered up now the phones dont come up/boot they just click. No leds light up on any...

We have an S8500 with Com Manager 3.0. We have a TN 464F installed and it used to be programmed as robbed bit signaling, B8ZS, and ESF. However we had to move the card, now that we are trying to return it,when implementing the ADD DS1 command, whenever we put in "robbed bit" and hit enter, it...

Ok, so we have a Mitel 3300 ICP switch with a TDM peripheral cabinet which has analog and digital line cards. We have some analog stations programmed on one analog ONS card PN#:MC320BE We can call other extensions from an analog phone on this card, and we can call the analog phone. When the...

We have a 2400 IMX with version 7400 software. We want to program up some names in the displays of the d-term phones. Anyone know what command to use to program this up, and if a certain package/option needs to be enabled or purchased? thanks Expertise in Avaya, Rolm/Siemens, Mitel, Nortel...

We are trying to find out what options/features need to be enabled on an S8500 with Com Mgr. 3 to have NFAS with backup (meaning if the primary d-ch goes down a second own takes over). Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone...