Search results for query: *

I am trying to put together a config for a 2960 switch (running 12.2(25)SEE3 C2960-LANBASE-M) that will give priority to voice packets which are already marked with DSCP 40 by the VoIP phone systems. I have successfully used Cisco 2950 switches to do this in the past so I want to ensure that my...

We have a client who currently has an Internet connection at Site A and a pair of routers that link Site B to Site A via 64k private circuit. All Site B Internet traffic goes via Site A. They want to replace the private circuit with some DSL circuits and Cisco routers but still route all...

I have got an ISDN2 to GSM Gateway on trial to try with a couple of different types phone systems that we maintain so I thought I would try it on an Argent Office and POTS16 with S0 module attached. I can get the ISDN link up between S0 and GSM Gateway but can't route calls from analogue phone...

We have a customer who is running a single IP403 - 1.4(25) with a POTS30 and POTS16 - both 3.4(25). They also use Phone Manager Pro - 1.4.6. We are going to site to look at problems with Phone Manager Pro on various machines and thought that we really should be upgrading as 1.4 is rather old...

We have a BT supplied ISDN-30 (Q931) that needs to be temporarily connected from the existing to the new Comms Room. The distance is somewhere between 150 and 200 metres and the plan was to either connect via existing multicore or run a single Cat 5 cable. Has anybody else extended a PRI over...

Any thoughts or suggestions on the following would be greatly appreciated. Site has IP406 running 1.4(27) with PRI and BRI-4 installed. It has an ISDN2e connected for remote support access and an E1 connection using QSIG to an ISDX. The ISDX has PRI to outside world. If an extension on IP...

I have been doing some testing with hotdesking users on 1.4(22). My concern is with what happens when they are not logged on. If Voicemail is enabled, the call goes to voicemail, which is what I would expect. If the user has forward unconditional set to a group extension number the call...

We have a customer who was using TAPI to make outgoing calls from Outlook fine on Windows 2000 Pro, but since getting a new machine with Windows XP Pro a problem has occurred. When you open a contact, choose the new call option, then click dialling options you get an error message and your 2...

I recently bought some kit which included 2 x IP 406 MU-Law with no interface cards. As I am based in the uk will I be able to use them here or is the actual hardware different from a uk spec box?

We have two Argent Branch 2.3(25) systems linked together by 512k kilostream. Site A has ISDN30 installed and incoming calls are routed either to local extensions (always ok) or across the WAN link to extensions on System B (sometimes only one-way speech path). The only likely looking line I...