Hai,
I have a question regarding BCN router. My customer is using a 8MB v 13.0 Flash Card. Currently the customer free size is less than 1MB (after I have Compact) the Flash Card.
I have an AN with 8MB Flash Card and less than 2MB free space and the ISDN protocol/bat do not work. While for...
Hi,
This is an error log from an AN router:
"Could not obtain files over network, will attempt local boot.
Configuration file '1:config' successfully loaded
BOOTSTRAP FAILURE: error obtaining boot files
Entering diagnostic monitor...
AN Diagnostics: Version - 7.34 - Tue Aug...
Hi,
I need some help both in command and info, on how Nortel configured and support ISDN. I need some command that can be used to verify that a ISDN line or the ISDN config have been configured corretly. I have no exprince in ISDN using Bay.
p/s
Is there any info on BLN router also...
Hai,
I am getting error from the Novell Sever AAL Statistic error on this particluar site using Fore Card and connected to a ATM C100.
Here is the error:
RCV Alloc Failure Largie Bi --> keep incresing
Cell Drops VCI Not Connect
Cell Drops Vci Out off range
A5 PDU CRC Error
A5 Congestion...
Hai,
Due to Heavy rain and thunderstorm arround my country, a few off my AN and ARN router have been struked by lightning.
While the serial port can be repair but the Flash Card file since to be wipe out. When I used a working router and try to see what inside the flash card i was advice that...
Hai,
I have a problem with one off my customer running this type off network:
1) Site A is having a 2mb Internet connection
Site B is having a 512k Internet connection
2) Both site have it own Firewall and are connected using
OSPF with all it bracnh site using Area 0.
3) By wright all...
Hai,
I have a very wierd problem with my ASN router, I have upgraded the Flash Card from 8 to 16mb and the Ram from 16 to 24MB. The original router was configured using Site Manger 12, and now I am using Site Manager 15.3. If my ASN router is down due to power trip, then this will happend...
Hai,
I have encounter problem when we bought a new ATM/ethernet Module on C1400 and it don't work due to Image problem. Can any one advice me what is the lattes Image for C1400. Secondly what is the status on Image 5.2.
Thanks
Hai,
Currently all the new Nortel Routers that I have recived is using Site Manager 15.20, I think the Image is also the latest on. From telnet is there any command to show the image/version off a particluar router.
Secondly, I have just upgrade an AN router image 12.2 to ASN-2 Image 15.20...
Hai,
I am currently configuring an ASN-2 with a 16MB Flash Card using SM 15.20. The old ASN can accept this ip *.*.7.1 with the 255.255.255.128 subnetmask. But when I try to configured using SM 15.20 the eror IP/Subnetmask mistmach appear. Can any one tell me how to solved this. I know...
Hai,
Some one suggested to the customer two have 2 X 2mbps line connected to a singel ASN router :(
Then inform the customer that we can configured Serial0 to back up serial1 incase the L.Line goes down. Each Serial have a different IP and DLCI to be configured. With the requirement B backup...
Hai,
Can Bay router have Primary and secondary IP as per Cisco Router. I have seen it on Bay Switch but I have never seen it on Site Manager( Ver 14) while all my current AN/ARN are version 12.0.
Thanks
Hai,
I have follow the below step and still fail.
connect to the ARN console port with a console cable
then power cycle the router
when the ARN begins running diagnostics, press the Ctrl+C followed by an ENTER (that's key!) This will bring you to a diagnostics prompt.
diag_1>>
Now, enter...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.