Search results for query: *

Hello, I am currently working on trying to ethernet-enable a MIRAN III card on an Option 61C. I have set the IP Parameters using the Management Console, and rebooted the card. I have connected a working patch cord from the Audio Adapter to the C-LAN switch. One thing I did notice is that...

Hello all, This doesn't make sense to me, and I was hoping someone could shed some light on this, tell me where to start looking. A----PRI----B----PRI-----C | |(T-1) | Central Office Customer site A has an Option 11...

Hello all, I am at wit's end on this: Customer has NVM 4.0 Offsite notification was set up, until toll fraud occurred. I disabled offsite notification, somehow too well, and now I cannot figured out how to set it back up. I'm not asking any of you if YOU remember what I did, just some insight...

Hello all, I am having an issue here with OTM, or the MDR-2000. I set up a node in the TBS, and configured the settings for call collection. The problem I am having is that when OTM goes to collect, I receive an error after the modem makes a connection of: The MDR-2000 buffer is not...

I've been racking my brain on this one, and really don't want to drive 6 hours to fix this, but: A customer in WY has an MICS 6.1, 2 0x16 sta mods, and a CallPilot 150. When he is performing a Button Inquiry (F*0), the set display tells him to "Release Calls". The set he is trying this from...

Here a weird one... I have a customer with a BCM 400, Rls:3.0 Build: 7, MB modules are as follows: DSM32+, CTM8, CallerID Trunk Interface (4) and a GATM8. Lines on CTM8 = 151-154/159-162 CID4 = 167-170 The issue I am having is as follows: All lines are set up in CallPilot to answer on 0 rings...

Was wondering if anyone has experienced Norstar door phone boxes not working assinging outbound trunks for off premise dialing.

Hello, I am networking another option 11C to our Option 81C. I have built all the requirements including: DLOP in CEQU, D-channel in ADAN, RDB and Trunks. When I attempt to bring the circuit up, the trunks come up, but I receive this error for the D-channel: DCH: 5 DISABLE INDICATION...

Hello, I am currently working on implementing a Shoreline ShoreTel system with and Option 81C (R25) via ISDN/PRI. I have built a D, a RDB, and trunks for this application. My D is set up as NI2, and the route and trunks are NI2, DID. This is the only way, it seems, that the two would talk...

I have a customer in Idaho with a BCM 1000. Most of the details on their system are sketchy, but I do know this: BCM 1000 top bay = Blank mid bay = 32 DSI ?? bot bay = DTM (ISDN/PRI) BCM Expansion Chassis top left = ASM 8+ top right = Blank mid left = ASM 8+...

Hello, I am troubleshooting a customer's NBX 100 system, and they are currently experiencing calls dropping. They have a T-1 circuit, but the problem only seems to be affecting about 3 telephones. We have swapped phones, cords, pwr supplies, switch ports, etc. and have also checked port...

Hello, I have a customer who has a MICS with 1.1 software. They have DIDs coming down a T-1, with 4 digits outpulsed from C.O. He has Target Line 147 setup with Received Digits of 3486 (full # 303-274-3486), and the Prime Set is *none*. In the Apps Mod, line 147 is set to Answer: Y...

I am currently working on an Option 81C. Some contractors recently installed a Bogen multi-zone amp for the Print Shop area. I responded by building a PAGE route, and trunk for this application. My route 79 has an ACOD of 1979. When I dial this off of Digital phone, I receive the response...