Search results for query: *

i was using an old xp laptop to access gui on cme (Cisco IOS Software (C2800NM-SPSERVICESK9-M), Version 12.4(24)T2), my laptop died, now i can use another lap top with xp or another one with window 10 i got the same results, i type the ip ,,, ,,, ,,, ,,,/ccme.html or the ip... ... ... ...

Hello Gens Does Cisco 7961, 7941, 7940 Screen is supposed to have Back light the contrast is ok, i can adjust the conteaste to darker or lighter but if there are no light in the room, the screen has no back light if there is back light, how can i turn it on? i have Cisco 2811 (revision 49.46)...

i have Cisco 2811 (revision 49.46) 249856/12288k bytes of memory running CME bootstrap, Version 12.4(13r) release software (fc1) CME version 4 i have a few 7961G registered and working fine any time i connect 7940, 7942 to the 3750 switch , the phone screen shows upgrading and it stay there...

trying to install ip communicator on a laptop mac address format 00 !B 33 1A 24 39 not accepted in CME any way arround it i tried 001B.331A.2439 it tried to register, but got no dial ton CME Config is mac-address 001B.331A.2439 type CIPC Button 1:1 thanks Gens Serge9

how to change the phone type and mac address to 7961 i understand we must remove old config associated with the dn then remov old mac, old type then enter new ones please let me know if you can help supply commends example very much appreciated serge9

hi to all cisco call mander expert i am an old nortel, norstar and SL1 tech, not much knowledge with cisco your help is appreciated in a Cisco Call Managet Express installed on 2811 i had 2 7961G, 1 7906, 1 ip communicator, 1 analog phone, all were working very well i disconnected 1 7961G and...

I got a home lab set with Cisco VoIP system (Phones, switches (3750 PS), Routers 2811) I got a friend of mine (lost his contact info) to install Call manager express and unity on 2811, He also installed Cisco soft phone, and Gui access to unity and Call manager express admin on a laptop And got...

Good day Gens I am X Nortel SL1 admin, i wanted to learn Cisco Voip, admin, etc I got a home lab set with Cisco VoIP system (cisco IP Phones, switches (3750 PS), Routers 2811) I got a friend of mine (lost his contact info) to install Call manager express and unity express on cisco 2811, He...

Hi Gens is it possible to have the ringe volume fixed at certain level, in a way that the user can not change it or lock the setting with a password it seems that user (night shift) put the volume very low!! :-), and during the day no one can hear the phone ringing Thanks Serge9

how to activate CLID on MICS 4.0 /voice mail appilication module 4.0.04A Line Cards are CLI incoming Calls show Line 1 or line 2 depending on which line it came on Thanks

i followed instrauctins Build a Route Services – Show Ringing Service – Next to Routing Service – Show Routes – Show Show Route: 001 – Show Dialout: No Numbr – Next changed to PoolA when i tried addidng destinayion code it saidd route not defined Build a Destination Code: Routing Service –...

new to Cisco voip and need your helpi had some fan problems with C3750 and it is under Guarntee, i asked to replace the fans, they send to me a refeb. switch same as what i havemy system is working all rightall phones (4) rigister properly and all is welljust the C3750 is noisyso, i copied the...

new to Cisco voip and need your help i had some fan problems with C3750 and it is under Guarntee, i asked to replace the fans, they send to me a refeb. switch same as what i have my system is working all right all phones (4) rigister properly and all is well just the C3750 is noisy so, i copied...

on an IBM Think Pad T61, system>Device manager>Ports (COM&LPT) COM1 and COM2 disappeared, i see COM5, Blue touth Com4 RIM Virtual Serial port V2 com6 RIM Virtual Serial port V2 when i start Hyper terminal, com1, come2 are not there only com3, com4, com5 and com6 are avalable i wanted to...

i was asked to add a voice mail box for dn 21 I added the Voice mail box, but could not assign ext 21 to voice mail box number 21 It said (in French) ext not assigned dn 21 is the control set for line 2 and line 3 Dn 30 is the control set for line 1 and 4 When dialing Dn 21 from inside upon...

Norstar Compact ICS REL 5 NT7B56FA-93 has 6 active lines and 16 ext only (2 used for Call pilot 100) could not activate another phone set check the wall jack, the cabling, the signal on each Pair i moved an active set to this wall jack just for a test, it worked fine the system would not allow...

How to connect analog Polycom SoundStation to Norstar compact ICS 8 x 24 (call pilot) do i need an ATA or there is a way to do it without physical ata and how can i get it to work Thanks Serge9

Ftr 983 does not accept 1020000 although i used it many times last week i tried 102000,1020000, ,, nothing works, can not get in is there a way to get in ftr983 Thanks serge

how to find out Voice mail dn on ICS Compact + Call pilot 100 Thanks serge9

Hi Gens on a Nortel Norstar 8 x 24 Compact ICS in system programing Music on hold :y, background music:Y oi tired Pin25 on Amphenol port Connector and Pin25 on Line Connector, it did not work, i can hear the music with But set, Feature 86 gives dead air on the phone speaker where did i go...