Search results for query: *

I know this is gonna be a long shot but never hurts to ask. Does anyone have the JITC certification letter for the CS1000 or any other Nortel products (CS2100, SL-100, Opt 11)? JITC APL Removed Products page does not have the PDF's for those anymore and was wondering if anyone has them saved...

Hey all, super quick question, looking at options for installing an AVAYA IP Office V2A in a nursing home, replacing the current Grandstream. The issue is that there is 1 MDF in the building and about 3 IDF's about 150 feet away (going down the wings) Currently, I would need in each of those...

When there is incoming call, the corresponding lamp on the phone DLX-30 is just flash but no ringing sound. The DND lamp on the phone is on. When is the possible cause ? Thx in advance

So we're having this issue where our media gateway's alarm LED is red and is giving the "sync primary excess" alarm when running the "show sync timing" command. Is there any way to get rid of this alarm? The T1 PRI's working just fine. There's no issues with the incoming calls and outgoing calls.

We are adding 12 SIP viking panic buttons (PB-3-IP) (that will contact an internal ring group) to our MXE III 9.2 system and will be adding additional licenses for those. We want to add the most cost-effective license that will fit the need for the panic buttons, so with the choice of single...

Trying to read data from a MySQL ver 8 DB into VFP9Sp2. I am now using an ANSI ODBC driver so no problem there, it doesn't crash but it will still not read the data correctly. Some tables have fields/columns that are encoded. It will read data from any table that does not contain any UTF8...

Hello - I am running across an issue on our Avaya SBCe in which we are getting OPTIONS Message Dropped incidents on all of our Workplace clients. Everything works fine on the workplace clients (not using messaging & have it disabled in 46xxsettings file), and not getting any errors on the...

Hi, I have an experimental home setup with an ISDN PRI link between a Norstar Modular Plus and an Avaya IPv500v2 R9.1. The Avaya is setup as ETSI and as CO end, the Norstar as CPE end (which can't be changed). I can make successful calls from a phone on the Norstar to a Nortel phone on a TCM...

Hello everyone. I'm writing this post hoping to find something I'm currently unable to find. In particular, I'm asking if anyone has any updates or patches, whatever they may be, for Crystal Report Server 8. I fully understand that it's a very outdated version, however, at my workplace, it's...

OpenScape Xpressions does not generate the ALI An OpenScape Xpression server on a Windows 2016 virtual machine does not generate the ALI to create licenses. Does anyone know if there is a command to generate the ALI on Windows? Thank in advance

...connection to an old Mitel PBX. The PRI-E1 is connected with the following command lines on the Hipath side: ADD-BUEND:7,"MITEL ",30,0,*,1,ON,0,0,NEUTRAL; ADD-TDCSU:OPT=NEW,PEN=1-05-014-1,COTNO=5,COPNO=5,DPLN=0,ITR=0,COS=5,LCOSV=1,LCOSD=1,CCT="TO MITEL...

Hello fellow colleagues, We got this exception code showing in Event Viewer log, having to do with the third party image management software, LaserFiche. (the main module is LF.exe, and the offending module is LFSO80.dll). What's is strange is the VFP 9.0 executable would crash out with the...

Hello Team I have an issue with a live BCM 400 release 4.0 that does not start all services. On boot the telephony gets stable but system has no voicemail and no access via manager or putty. The status led is off and the hard disk led from time to time blinks at a very low rate. I can ping the...

Hello, Fellow geeks and Nerds. Old guy here. I have a cust with Avaya CM 10.2 using IX Messaging. They use J169 SIP phones. The phones are all set to roll to VM (4 rings basic set up). A small group of 4 phones all have a line appearance of another "pilot phone" on their phones. They use it...

Good afternoon, I need to create a text file like the one attached, with data from a cursor. What command should I use to put the data in the text file and how to respect the columns of each piece of information? I appreciate any help.

Have a small key system installation with Analog call boxes. 2 of them are over the maximum distance allowed. Any recommendations on a ethernet to analog adapter?

I have two hotels that are sharing one MiVB system. Both hotels have been sharing a PMS system, but they are now changing one of the hotels to a new PMS and leaving the other alone (for now). I've found both here and on the Mitel forum that others are having this same issue. iLink from...

Hey all, Thanks for all of your help so far with this project, I appreciate having access to this knowledge. I was wondering, is there a way for me to “reset” the config without losing any of the licensing in-place? I think there is an issue with the old translation but I want to wipe it like...

Hi I am starting a new IPO 500 v2 with avaya IP end points licenses , preferred edition and J159 terminals. I am trying to connect with IPO500. I have SIP licenses. The terminal gets the IP address fromm the dhcp server in the network. I configured SIP proxy manually. As the licensing is...

In recent years, I have seen that our company and other business partners have been migrating heavily to the Yeastar PBX system. I think there should be a topic for Yeastar PBX systems in the forum. What do you think?