Search results for query: *

Hi The scenario is I have a customer with an MPLS network. At one site there is an internet breakout with an ASA on the end of it. The ASA is aware of all the remote MPLS networks. I am trying to create a LAN to LAN VPN into the ASA from the internet and provide access to one of the remote...

OK so this is an experiment. I have 2 ASA's. One that terminates my Internet connection at my office. On this I have setup a RADIUS auth for device access to a server running AD and NPS and this works fine. The second ASA is at a customers premises and what I am trying to do is to use the...

Hi, I am wondering if this is possible, and I have a feeling that the answer is no, but its worth a shot. We have recently moved premises and been given an ADSL connection with just a single static public IP address. I have got the 2800 up and running on this connection fine, but we have a...

OK, have configured a remote access VPN and it connects OK and the split tunnel works OK, but no data is passed between the remote site and the LAN I followed this walk through on creating it: http://www.cisco.com/en/US/docs/security/asa/asa80/getting_started/asa5500/quick/guide/remvpn.html...

Hi, We have MS CRM3.0 running and the guy who looked after it left the company. Before leaving he has disabled a couple of users. This may sound like a stupid question but how do I enable them again? Thanks in advance

Hi, Pretty new to SNMP, the situation I have is a network of cisco catalyst 2950 switches, which I would like to know if a cable is disconnected from any of these. Is it possible to use SNMP to report when a connection is lost on a port? And what software would you advise to do this? Cheers

Hi, I have had a look on previous threads but cannot find anything. I have a couple of laptops that are leaving the office for a couple of a weeks at a time, when they come back they cannot log on to the domain unless the network cable is unplugged, so not really logging on to the domain! To...

Hello, I have been given the task of securing out ASA 5505 to only allow outbound HTTP and HTTPS traffic. (so machines on the inside interface can only browse web traffic) I have done the below and it works a treat for the HTTP traffic but not for the HTTPS. Everything else outbound is...

Hello, I have a scenario where I have a set of IP phones that need to receive a certain option from DHCP to connect correctly to the phone system. I am wanting to use a Cisco ASA 5505 to provide DHCP, which is fine, but how do I add additional options to the DHCP scope. Thanks

Hi I have a Cisco ASA providing VPN connections. The VPNs connect but i cannot ping the internal network once connected or browse RDP etc. Config is below. I must be missing something fairly obvious I think: Thanks in advance : Saved : ASA Version 7.2(4) ! hostname RedditchASA5505...

Hi I have a 1800 and an ASA 5505. I have a /29 external IP range. What I am attempting to do is put one of the external IP addresses on the external interface of the ASA and on of the IP's on the internal interface on the 1800. I have tried this and cannot get it to work. The 1800 is on the...

Hi All, I am having a problem with a Cisco ASA 5510 that is terminating remote VPN client users. The VPN always connects weather using the local authentication or the RADIUS authentication but it does not always allow traffic to pass. I would say its about 50/50 as to wheater, when connected...

Hi, I have a scenario where i have a Catalyst 4506 with a 48 port gigabit module, and some servers (HP) with 2 gigabit NICs. What we are wanting to do is bind the NICs together and configure the 4506 so that each server has a 2gb connection to the switch. Trouble is, I have no idea where to...

Hi, I have an ASA setup with VPN clients and split tunneling, all which works well, however i need for the users to be able to access another network of ours through another route sitting on our LAN. I am assuming I need to send a static route to the client, as I have the route in the ASA but...

Hi, I have a Cisco 5510, with VPN's set up that authenticate to a RADIUS server. All is working fine, but what i want is for the remote VPN user to still be able to get on the internet via their local connection. Is this possible? The remote client has local LAN access fine. Config below...

Hi I have a Cisco 5510 allowing access out to all IP addresses on the internal interface. I would like to only allow outside access to IP addresses above 192.186.1.192, i'm sure it will have something to do with an access-list, but i cant find the specific command. Thanks for any help

Hi, I don't know if anyone else is curious about this but i am very confused. basically i have two LANs linked by a VPN (Zywall 35 to Zywall 35) and pinging across the link is fine. If i ping the remote Zywall LAN address i get a response with a TTL of 253 If i ping a machine on the remote...

Hi, The situation is, we have a database (which i built) containing data about our customers contracts. I am also developing a company intranet. Basically what i want is a web based front end for the database. I wouldn't class myself as a great web developer or a database developer. Do i have...

I'm trying to create a query that will return all records that meet the criteria of a month chosen by the user. Background: I have a number of records that show when a customer needs invoicing. I want to be able to search the records for, say, march, and get all of the records that month. At...

This might sound a bit stupid but i'm quite new to VPN's About to install a tunnel between two sites and was wondering if the fact that they have the same internal LAN IP range would cause any problems when setting up the local and remote ranges. Thanks in advance K