Search results for query: *

Hello all, I have configured an RSPAN monitoring session on a 2950 switch. I have configured a remote-span VLAN from the VTP server switch, and checked on my monitoring source switch (VTP client in the domain) that the VLAN shows up as a remote-span VLAN. I have configured the reflector...

Hello all, I need to conduct a benchmarking test across LAN/WAn infrastructure. We have been asked to repeatedly record the response time of various applications as they perform the same task several times a day. Does anyone know any automation software that can both launch...

Hi all, I have to deploy LMS 3.0.1 and AAS 2.1 in a tight physical space. Does anyone know if both products can co-exist on the same server? Many thanks

Hello, I have the unenviable scenario of being forced to use encryption on the links between switches. They will be point-to-point gigabit links via SFP/GBIC adapters. (I know encryption shouldn’t be necessary on a point-to-point topology, but it’s been decided from so high it needs...

Hi - I have two 2651's, both running IOS v 12.3(11). They are configured with EIGRP, OSPF and a couple of classless static routes. The EIGRP vlan-based sub interfaces face each other, the the OSPF and Classless go out over a separate interface to a third router running an older (12.3(8) IOS with...

Hi all; I have a scenario where we have a domain controller and a member server in a remote site, connected by a satellite link. The DC in the remote site can verify the member server no problem, however no DC or member server anywhere else can verify it (Member servers say "The RPC server...

Hello; We are attempting to restore an exchange serve from V2I image backups in order to expand the C: drive. We restore the images themselves successfully, however upon reboot after installation, the M: drive is missing. Has anyone had any similar experiences? We specifically exclude the...

Hi All, Does anyone know how to log a drive without logging on to a server? Reason: We have a back-tier application on a server that needs to access data on another machine - There are too many hard-coded references to drive letter to simply replace with a UNC path in the app, so I really...

Hi - I have inherited a Windows 2000 cluster where SQL will not start as a cluster resource, but starts on individual nodes from the OS level. In the event log I see: MSSQLSERVER Error (3) 17052 N/A BOPDEV1 [sqsrvres] checkODBCConnectError: sqlstate = 08001; native error = 11; message =...

Hello all, We have a farm of 7 servers, publishing multiple applications. All servers are uniform (as far as I can tell!), and publish identical applications. One group of users access one particular server via NAT over a firewall. Since an entirely different server was withdrawn from...

Hi - we have a problem with the size of print jobs being generated via the UPD. For instance a job that is kilobytes in size on a local driver can wind up being tens of megabytes. This tends to cause a lot of problems. Has anyone experienced the same? All tips appreciated.

Hi All, Has anyone ever managed to successfully rename a service? Scenario: We have a cluster, with an application installed via both nodes onto a shared drive. Problem: Services have been generated with different names on each node, therefore the cluster cannot automatically failover...

Hi, We run Remedy Client 5.0.1 via Citrix clients in a server farm in Asia pacific. We have a problem in that because Australia changes later than other AP countries (and some other AP countries don't change at all), we are faced with a choice of either running our clients on Australian time...

Hi, We run Remedy Client 5.0.1 via Citrix clients in a server farm in Asia pacific. We have a problem in that because Australia changes later than other AP countries (and some other AP countries don't change at all), we are faced with a choice of either running our clients on Australian time...

Hi - I have a shared mailbox under 5.5 on NT4, it currently has over 20Mb allocated space more than it's current level, but it's still refusing to accept emails, and won't let the user send.

Hi - I'm experiencing really strange behaviour from our terminal server cluster running Network load balancing. It seems to work fine for approx 24 hours, then drops out for no visible reason. The individual nodes remain fine, but the Cluster IP address stops answering from remote subnets. If...

HI - I've trying to run NLBS from 2 W2K advanced servers, but NLBS only seems to work on certain subnets. The individual node addresses (on the same subnet as eth virtual) respond OK, but from certain subnets the virtual IP address doesn't even ping.

Hi Guys, I'm trying to apply our corporate policy to our Terminal server Advanced Client sessions, does anyone know how to change the backdrop that TSAC clients recieve? TIA

Hi - we have a serious problem in our User domain, recently an increasing number of users are having their accounts locked out, whilst in any state from attempting to log on, to logged on, to not logged on at all. I've reset all users in the domain multiple times to clear the locked out check...

Hi, I've built a new 5.5 server running windows NT4.0, sp6, and applied exchange service pack 4 to replace an old server. I've managed to move user mailboxes with no issue, but I can't see any of the old servers public folders in the "instances" tab on the new server to add them. Under...