Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: cammy
  • Content: Threads
  • Order by date
  1. cammy

    igmp configured - but multicast flooding

    I've had a working IGMP config in place for some time but multicast now seems to be flooding out every switchport (switches are all L3 cisco 4948E). on each switch the config was: ip igmp snooping querier address 192.168.0.1 and on the querier switch: ip igmp snooping querier ip igmp snooping...
  2. cammy

    Cisco WS-X2948G-GE-TX multicast igmp enable

    Hi I'm trying to setup igmp snooping on our catos switches (WS-X2948G-GE-TX running software 8.4(11)), but the command set igmp enable is simply not available. Everything I read suggests that igmp snooping should be supported. I can set cgmp enable. 2948.185 (enable) set igmp ? filter...
  3. cammy

    vlan mismatch

    Hi We have a vlan mismatch between our main office and test networks. The native vlan in the office is vlan1. In the test network their main subnet is vlan1, and the office subnet is vlan3. I'm trying to link the two networks together and avoid broadcast traffic from the test network. I...
  4. cammy

    strange DNS cache entries

    Hi While looking for a solution to another DNS issue, I discovered a load of worrying looking entries in my windows dns cache. There were hundreds of these nonsense entries: Windows IP Configuration mzzdtglfljscaqwsljzkvtcdqmzuc.org ---------------------------------------- Name...
  5. cammy

    Cisco C2948G

    Hi We have about 8 of these switches at work and I'm having problems with the length of time it takes end user devices to join the network. I've tried enabling portfast on specific ports and this does increase the time a bit, but I've still got to wait 30-60 seconds at the logon screen for the...
  6. cammy

    ws-c3550-24 support subinterfaces

    Hi Does anyone have a definitive answer on whether the C3550-24 running the EMI image can support subinterfaces in the form int fa0/1.1 ? I can't get it working but this chap seems to have: http://www.tek-tips.com/viewthread.cfm?qid=1559316 Thanks Cammy
  7. cammy

    unmanaged fibre

    Hi We've just had an additional fibre connection installed at work which comes into a media convertor > ethernet. We hadn't considered the implications of an unmanaged service other than the ISP nor providing a router. It transpires that we have to configure their WAN subnet to our public IP...
  8. cammy

    Cisco inter-vpn routing

    thread35-1630770 Hi Referencing the old thread above, would a ISR work or must it be an ASA? Thanks Cammy
  9. cammy

    Bind 9.7 no reverse DNS without recursion enabled

    Hi Our last two installations of BIND 9.4 and 9.7 on a windows server 2008 box will not allow reverse DNS queries without recursion being enabled in named.conf under options. Should this be the case? Thanks Cammy
  10. cammy

    Multiple site to site vpn routing

    Hi We have a central office with multiple satellite offices all connected with site-to-site vpns. The central office is running a PIX 506e and there are various 506e's and 501's at remote sites. We also use the cicso vpn client at two different remote sites. I would like to be able to route...
  11. cammy

    allow root domain access with breaking rDNS

    Hi We have our www server hosted externally and have A records in our zone file (bind) to point to this IP. Our rDNS zone file points at the ip range of our company hq for email rDNS lookups. I would like to be able to have the root domain (ie http://cammy.com) point to the webserver ip only...
  12. cammy

    pix 501 encryption license reduces inside hosts to 10

    Hi I have an unlimted pix 501 with no encryption license installed. I have applied for and received a 3DES license. When I install the 3DES license, the inside hosts goes from unlimited to 10. Thankfully I had the presence of mind to keep a note of the old activation key. Is this normal...
  13. cammy

    cisco pix 501 site-to-site vpn subnet issue

    Hi I've configured a site to site vpn tunnel which is up and working as I would like. I have configured persistant routes on the pc's at each end that need to speak to each other. The subnets are as follows: Site 1: 10.0.0.0/11 Site 2: 192.168.200.0/24 I am running into problems when I try...
  14. cammy

    DHCP Authorization in windows server 2008

    Hi I am having a nightmare trying to get dhcp working in a new windows 2008 server. The dhcp status never changes to green although the server is listed as authorized when looking at "Manage Authorised Servers" and also in ADSIEDIT in the usual place. The event log is showing DHCP 1059 and...
  15. cammy

    Calendar & Scheduling Assistant permissions

    Hi We are experiencing weird permissions issues with users calendars and the outlook (07) scheduling assistant. The assigned permissions under the calendar properties for a user do not reflect what someone is able to view when they are using the scheduling assistant to arrange meeting...
  16. cammy

    ip pool problem

    Hi We have recently found that new machines running cisco vpn client have not been able to get an ip address from the 506E (unlimited users). Existing machines which have previously connected have no problems. The new machines can connect and authenticate ok but fail at the stage when the...
  17. cammy

    Can connect Cisco VPN Client but can't see anything

    Hi I am using the Cisco VPN client 4.6.00.0045 to connect to the company pix. I can connect and authenticate no problem by plugging straight into my cable modem. I can connect and authenticate through my router, but can't see or use the company network. I have forwarded the required ports...
  18. cammy

    Exchange 2007 Mailbox permissions inheritance

    Hi, We have discovered a security issue with our exchange 2007 installation. All our mailboxes have domain user and authenticated user in the security list with full access rights. This allows anyone to view any mailbox contents. We have just discovered this and need it urgently fixed. Adding...
  19. cammy

    Dell RD1000 Backup Exec 11d

    Hi I am having serious problems configuring backups with a new Dell Poweredge 840 with an internal Powervault RD1000 removable disk drive. I have tried adding backup to disk and removable backup to disk folders and the media appears as online. I cannot, however, run any backups or catalog the...
  20. cammy

    Where are my hyperlinked images going?

    Hi I've designed and uploaded a website (www.dalbeattiehardrockchallenge.org) but I'm having serious problems with 3 hyperlinked images in the site. Using ie7 at work the site appeared fine but with the same browser and with firefox at home it is not showing the images. Here is some of the...

Part and Inventory Search

Back
Top