Search results for query: *

Hi all, I have 2 boxes both running ML5.2. They are configurated as a HACMP. How to check their HACMP versions and how to know any HACMP patch they have been applied already? What is the latest version and its patches? Thanks! Regards, Jack

Hiya, My HP-UX 10.20 box came across a problem on reboot... Everytime when I issue shutdown -y -r now to reboot the box, after reboot finished and start running init, it pops out a warning message saying that something like "Bad shell /usr/bin/ksh for root, please change the /etc/passwd and...

Hail~~ Few days ago I brought back my very old Openserver 5.0.2 box out for testing purpose. I removed its old DDS-1 tape drive and installed a new Compaq SDT-9000 DDS-3 drive in. After mkdev tape and selected the DAT model, kernel was rebuilt and the drive worked properly after reboot. The...

Hi, y'all: I am trying to backup a whole directory for a HP-UX 10.20 box which for some reasons cannot add a DDS tape drive attached to it from a Windows 2003 box which has a DDS drive attached. Anyone out there has experience on how to do that at night time without being interact with human...

Hi, y'all: I am trying to backup a whole directory for a HP-UX 10.20 box which for some reasons cannot add a DDS tape drive attached to it from a Window 2003 box which has a DDS drive attached. Anyone out there has experience on how to do that at night time without being interact with human...

Hi, I guess RH9 has enabled ACL in their kernel so I run "setfacl -m u:jack:rx,m::rwx filename" but then got "Operation not support" error message. Okay, I went to kernel.org and downloaded 2.4.20 kernel-source and Debian downloaded kernel-patch-acl for 2.4.20. After patched...

Hi, I have a modem on HP-UX 10 and users can logon by dial-in. My problem is: I want to set an idle time for the user who is logon from the modem. I can simply set an env TMOUT=XXX inside $HOME/.profile to do that. But there is a group of users who are sharing the same home directory and using...

Dear all, I would like to know whether those 3 mobos below can fit SCO OpenServer 5.0.5 or not: A) SuperMicro / SUPER P3TDER(+) Onboard Controllers: 1. ATI Rage XL 8MB AGP VGA controller 2. Dual Intel 82559 Ethernet controllers 3. Adaptec AIC-7899W dual channel Ultra160 SCSI controller B)...

Hi, I'd like to know why I will get a different MAC address from ifconfig and /var/adm/syslog on a single NIC? From ifconfig it showed 00:ff:46:93:00:ff, but syslog showed another. I am sure that the MAC shown by ifconfig is wrong since I've checked IEEE site and couldn't search any company...

Hi folks, My SCO Openserver 5.0.5 seems hang on telnet and ping very frequently but I can't trace what the error message come out in the /var/adm/syslog file. When I looked at the /etc/syslog.conf, it only contains one line: *.debug /usr/adm/syslog I thought it is not...

For some reasons I need to upgrade the Compaq EFS on Openserver 5.0.6a in a ProLiant 800 box. When I installed the latest Compaq EFS 5.48 first disk image file, it asked me to enter the IP address for an NIC in a PCI slot. I made a mistake and entered a wrong number, not the one in the original...

Dear all, My ISP forces my company to use their transparent proxy servers to access the Internet. Can I get rid of it by setting up a local site proxy server and have all browsers change to that proxy server manually? Will I still go through their transparent proxy again? Jack

Dear all, I have a SCO Openserver 5.0.5 and it always encounter a sudden network down problem. All the connected terminals are kicked out but the console is still working fine. It only kicked out the terminals connected to that local box but not for the box in other side of the router. I guess...

Dear all, My ISP forces my company to use their transparent proxy servers to access the Internet. Can I get rid of it by setting up a local site proxy server and have all browsers change to that proxy server manually? Will I still go through their transparent proxy again? Jack

Dear all, I've just upgraded my SCO Openserver from 5.0.2 to 5.0.6 and hardwares also. I found that the tar backup or restore was extremely slower than my old system. It took me more than 4 times time to finish backup a similar amount of data. But when I used CPIO instead, it was very fast to...

Hello all, My friend purchased a Sony VAIO PCG-SR9GT laptop with Windows 98 preinstalled but she didn't buy with the CD-ROM drive, only the floppy drive! She installed a Panasonic PCMCIA CD-ROM (KXL-808) instead and worked under Windows 98 perfectly. Few days ago, she formated the harddisk and...

Hi all, Regarding my previous thread thread58-189509 , my HP DDS4 24G tape dirve are being worst by the time. Although the cha_print_warnings valiable is set to zero in the space.c file, the error messages still appear in the syslog. But it's not a big deal. The worst thing is that the drive...

Hi all, My boss wanna ask for some reference on the price of the yearly CS fee since he is wondering why the price he just received are much higher then last year. Could you guys give us some price examples for this and last year (if they can be explosure)? Thank you very much!

HI, I've just upgraded my SCO openserver 5.0.2 to 5.0.6 onto a better server and restored all necessary files from the old box to this new one. After a week, I got an error when anyone trying to telnet into the new server and were kicked out by server BUT "root". The error message...

Hi friends, I was wrongly set the system console to some tty and not the tty01 when I switched one SCO OpenServer 502 to single user mode. Now whenever boot up the server, I need to switch ttys to finish the boot process. How can I set it back to normal (tty01)? Thanks! Jack