Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Andrew_G
  • Content: Threads
  • Order by date
  1. Andrew_G

    CS1000 CPPM read security dongle information

    Hello! I found reference that on a M1 with CPPII that when booting with a CDROM there's an option on the Tools menu to read the security dongle information (dongle engineering code, type, system serial, SDID). Is there a similar function on the CPPM (I'm running 7.5)? Are there any hidden...
  2. Andrew_G

    CS1000/MG1000 DS-30X and CE-MUX pinouts

    Hi all! Does anyone happen to have the pinouts for the DS-30X and CE-MUX connectors on the MG1000 chassis? Also helpful would be a pinout for the DB-25 connector cables between the main chassis and expansion, I believe these cables are part number NTDK95BB. Thanks, Andrew
  3. Andrew_G

    CS1000 Signalling Server running on VMware 6.7U2 - Success!

    To go along with my other tip, the CS1000 7.0 Signalling Server runs fine on modern VMware. I'm using VMware ESXi 6.7U2 on a Dell R510, storage is running off of iSCSI on FreeNAS. I've got two VMs, leader and follower using a VXworks CPPM Call Server. Network is a mix of random e-waste...
  4. Andrew_G

    CallPilot 201i SSD drive replacement success!

    So in case anyone is wondering you can replace the HDD in a 201i with an SSD. I've used an older Kingston SV300 120GB with a Startech IDE2SAT and it's working perfectly. I'm thinking any SSD should work as long as the BIOS recognizes it. I did a straight clone of the drive using a Windows PC and...
  5. Andrew_G

    CallPilot 201i Boot Failure "HOST"

    Hi! I have a CallPilot 201i with SCSI (no USB) and it is failing to boot. The front screen says "HOST" and there is no VGA output. I'm thinking it is bad RAM but was there anything else I could try to diagnose the failure? I've already ordered some RAM from the usual online auction site, so...
  6. Andrew_G

    CS1000 Rls 7.5 - Adding node removes signalling servers

    Hi All, I think I have everything set up correctly in UCM but when I attempt to add a node as soon as I save the settings the servers disappear from the Signalling Servers list. If I remove a server (or servers) from the node configuration they appear back in the Signalling Servers in...
  7. Andrew_G

    CS1000 Rls 7.5 - Element Manager not loading

    Hi! In my lab I have a used CS1000 with CPPM running VxWorks Call Server Rls 7.5. The CS is all working correctly and with some help of a friend we reconfigured the cards, got inbound and outbound calling working via ISDN to a Cisco 2851, and analogue set dialing. :) So my problem is this, I...

Part and Inventory Search

Back
Top