Search results for query: *

In >System >Telephony >Call Log, I have checked all three options: "Default Centralised Call Log On", "Log Missed Calls Answered at Coverage" and "Log Missed Huntgroup Calls". In >System >Telephony, "Default No Answer Time" is set to 20 seconds In >Group, the respective Hunt Group has "Voicemail...

thread940-1711425 On >User >Telephony >Call Log, I want to check a Group entry within Log Missed Huntgroup Calls, however am unable to check an entry. All HG entries are unchecked and intuitively I would expect to be able to toggle check/uncheck against an entry. I have tried with the three...

thread940-1759075 I have a question following on from the above thread. Having programmed to Pepp77's example above (2nd post in the thread) and editing telephone numbers in the directory by prefixing them with the desired outgoing line ID, in doing so, there is no longer an exact match on the...

I have the following setup: BRI Line 5 with Incoming Group ID set to 155 on the BRI Line tab Incoming Call Route has Line Group ID set to 155 in the Standard tab and the Destinations tab set in the order as keyed below. I understand the list executes from the bottom up. Default Value: Ext 221...

I'm setting up a refurbished IP Office v2 on Release 9.0.3. The control unit is loaded with 2 x Combo cards in slots 1 & 2 and 2 x TCM8 cards in slots 3 & 4 The system has currently not got any trunks connected (as our 3 x ISDN lines are in use with our existing Norstar Compact v4 system) so am...

I'm setting up a refurbished Norstar IP Office v2 on Release 9.0.3. The control unit is loaded with 2 x Combo cards in slots 1 & 2 and 2 x TCM8 cards in slots 3 & 4 I have IPO Manager installed and have been familiarising myself with this and working through the installation guide. The problem...