Search results for query: *

I'd like to send calls that don't answer after a certain set time from a hunt group to the auto attendant? The backup destination doesn't give me the option for auto attendant. Thanks! You guys always come through.

Our fax line is designated to an analog extension Module BP2 and Port 1. I assume the fax line plugs directly into this port and goes to the fax machine, so how should this port be labeled on the Avaya hardware? I don't see a module labeled BP2 or a port labeled 1.

Looking at SV8100 program 47-02. If we need a phone to continue ringing and never go to voicemail, is this accomplished by not assigning an Inmail extension? --tj

We have one extension in our SV8100 NEC system that has to select the line after the call is picked up. I was hoping somebody knew where this is configured? --jp

We have one extension on our PRI that displays the blinking light on line 1, but it doesn't ring or show the number on the display. Where do you go to make this extension ring on all incoming calls? I have 16-02 assigned the extension that isn't ringing to the same as others that do ring.

Hello, Group: Added a few extensions, all is well, but the first couple lines are not lighting up like the rest of the phones. We have 5 lines, and on the phones it works they all light up, but these new lines are only displaying lines 4 and 5. --tj

I see that port 31 is connected to our paging system, but where in the NEC UI do you specify what port to use for paging? Port 31 is left blank, so it's not connected to any extension, but can't find that anywhere else. SV8100. Thanks!

Our phone displays are showing "Ringing," and not company name. Is this a setting in the phone, or is this a setting with the phone company? Thanks.

Where do you configure paging between NEC8100SV systems? We have three locations, and would like to have keys programming to page over VOIP. Bldg A: 3xx Bldg B: 1xx Bldg C: 5xx F-Route tables look like this for one NEC: 44-02: 3@@ 7911 7912 5@@ When we dial 7911: ICM Dial When we dial...

How do I know how many roll over lines our NEC will support? We have 3, but line 2 is not lit on our phone.

We have three offices connected using NEC SV8100 device, problem is the new location cannot here anything both ways from the two existing locations that are already communicating. We suspect it's the firewall, which is doing NAT, but does have the RTP and SIP helper modules loaded. We can see...

I would like to add a static route under 10-45 for the network 192.168.2.0/24 to route to 192.168.1.93 (The NEC's LAN) and the 192.168.2.0 the other VOIP network. I added the entry as 192.168.2.0 mask 255.255.255.0 gw 192.168.1.93, but not sure if it's working properly. After applying, do I...