Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. sayoudbilel

    problem adabdation ligns analogique with equibment msan chinoise

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B I have an analog line extension number 33312 at a distance of 15kilo to transmit I use a mini msan equipment (zte) to amplify the signal I managed to amplify it up to 15kilo but I found an Numbering problem of the mission(call) but the reception is...
  2. sayoudbilel

    Please tell me how to configure h.323 on emg800 and mg100:

    Please tell me how to configure h.323 on emg800 and mg100: A : pabx(emg800) sit 1 : plan num 32x.(emg800) B : pabx sit(mg100) 2 : plan num 33xx (mg100) Question . On MG100 in H.323 ATTR incoming (362) [N], it was possible to register From IP Address = UNKNOWN at the same time in the...
  3. sayoudbilel

    how to configure h.323 on emg800 and mg100:

    Please tell me how to configure h.323 on emg800 and mg100: A : pabx(emg800) sit 1 : plan num 32xx. CO DID type, 3 groups, cos1, h323 only.(emg800) B : pabx sit(mg100) 2 : plan num 33xx co did type, 3 group, cos1 , h323 only.(mg100) Question 1. On MG100 in H.323 ATTR incoming (362) [N]...
  4. sayoudbilel

    HOW TO strapd 60 OR 70 IN THE CARD TMU TO SEE 600 OHM

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B HOW TO strapd 60 OR 70 IN THE CARD TMU TO SEE 600 OHM WATCH THE IMAGER ATTACH AND SAY ME IS TRUE OR FOULST
  5. sayoudbilel

    cancel dtmf on cart elu29

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B 2 QUESTION / 1- how to change the tone of the system exmpl tonalite america(usa) 2- how to fix the analog lines of the elu29 board only on pulse (decadi); knowing that the default lines are pulse and dtmf
  6. sayoudbilel

    change impedance 10kioms to 600 OHM for tmu2

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B possibl straps tmu HOW TO FIND 60 AND 70 IN THE CARD TMU how to strapd tmu 60 and 70 in the card WATCH THE IMAGER ATTACH AND SAY ME IS TRUE OR FOULSThttps://files.engineering.com/getfile.aspx?folder=e8c66002-afea-4886-b8cb-c4e4bd12d2f8&file=77.jpg
  7. sayoudbilel

    change impedance 600ohms and 10kioms for tmu2

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B possibl straps tmu how to strapd tmu 60 and 70 in the card http://files.engineering.com/getfile.aspx?folder=a65df788-a1a2-43cd-9675-81c49ff87680&file=s-l300.jpg
  8. sayoudbilel

    change the country application systeme belgium to application system austria

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B possibl change the parametre country application systeme belgium to application system austria
  9. sayoudbilel

    change value ATTN from 2 to 0 signals of analog extensions.

    Hi, I've a problem with the attenuation/amplification signals of analog extensions. in MD110 VERSION: CXP1010117/2/BC12SP6/R3B FIRST i changed the trm for an extension 2000(excac :dir=2000, trm=1;or trm=2 ;or trm=3). attenuate is THEN =2, RESULT: NO CHANGE!!! please help me to find the ATTEN=1...
  10. sayoudbilel

    LIGNE ANLOGIQ LONG DISTANCE

    HI In MD110 VERSION: CXP1010117/2/BC12SP6/R3B I experienced a problem of the long lines analogue extensions 4kiloDistance 4km cable 0.5mm (twisted pair), reception 5 5,I can't dial DTMF or decadic..... I think I should change in SCAOS, right? Does any one have the modification for the long...
  11. sayoudbilel

    Cannot call to internal long distant

    hi Sorry for the language im from algeria MD110 VERSION: CXP1010117/2/BC12SP6/R3B - card TLU75 trunk 8 - card TLU29 anlogiq 16x2 abonnee - card TLU28 numerique My company function by 20 pts anologiq in local offices and 5 pts anologiq long distance from 5kilo to 50kilo to traver algerie telecom...

Part and Inventory Search

Back
Top