Search results for query: *

Hi all, We have 2 sites that had each a dedicated PBX. This is now changed to centralized VoIP system (Avaya 8530). Issue is: People can now call each other by the last 4 digits of the full number. But we see a lot of people dialing the full number (0 for outside line and then the full...

Hi all, I have the problem that calls over the BRI trunks are dropped (in random order). When an Avaya Call (call made from Avaya station) is dropped we only see "idle station xxxx" in the trace. When an Office Communicator call is dropped we see a denial event "2307: TDM resource blockage...

Hi all, I have a 8300C with 3 G450 attached to it, running CM 5.2.1 1 G450 is installed in a datacenter, the 2 other are installed in office sites (so both are remote). Each G450 has local lines for incoming and outgoing calls(BRI's in the offices, PRI/E1 in the datacenter). We also have...

Hi, We have the following network region setup: IP ADDRESS MAPPING Emergency Subnet Location From IP Address (To IP Address or Mask) Region...

Hi all, It is a bit of a long questions but I will try to explain my issues a good as possible. We have currently a G450 with a 8300c in an external datacenter. Our first site has a G450 with a BRI trunk. We are now going to add a new site (also G450 and BRI trunk) and add a PRI to the 8300...

Hi, We are planning to use an Analog Dect on our Avaya 8300, with a G450 in each location. I need to check if the "flash" is 125ms. My question is: where do I find that info?? Thanks, Erik

Hi all, I have been working on an Avaya system for more then 10 years but unfortunatelly I have been out for about 2 years (so lots of stuff has changed) and also worked on a Nortel switch for about a year, that does not help as well :) So maybe a stupid question but here it goes: We have a...

Hi all, I'm in the process of writing an on-line telephone directory (has to include details) for the company I'm working for. This will be published on the intranet. I can connect to the Server and get some fields back using LDAP. I can create a alpha list but I need to be able to publish...

Hi all, Is is possible to route a call from station X directly to the voicemail of station Y ?? Example: Call comes in at ext 9622 Call is routed to ext 9296 and answered Ext 9296 wants to route call directly to voicemailbox of ext 9622. Is this possible ?? I tried a lot...