I've noticed on eBay there is a private label Netgear VG2004 that is branded by Avaya as a G10 or G11 analog gateway for their short lived OneX Quick Edition.
I know a little that it was a P2P SIP system, and it uses SIP to talk to the other telephones, etc. The G10/G11 basically ties to SIP...
I've dealt with a couple IP Office 400 Control Units where both were damaged by mild or freak thunderstorms. One of those control units did start to smolder and when plugging it for experimentation months later as it was totally decommissioned, it totally started to smoke up.
I was wondering...
Hi All,
I am attempting to do a project where IT IS POSSIBLE to do P2P SIP (I believe you disable authentication) and you can call P2P SIP sets. The setup is equivalent to a KSU-less system just over IP instead. I'm not going to buy one of those systems like the old Avaya OneX QE or Aastra's...
Hi all,
I struggle with Cisco IOS/IPT, and everywhere I go it seems to result in redirecting to other URLS or people just ripping and pasting vague info from other sites instead of just replying and dealing with a direct question.
I would like to understand how can I add an FXO/analog trunk...
Hi,
Knowing the limited nature of ESXi (yeah I understand security, blahblahblah), is there a way ether through NFS or iSCSI between two ESXi hosts? The theoretical setup is one ESXi to be a backup server to another ESXi that would be the main machine and it would back up virtual servers. Right...
I'd like to know if I can use a third party, non ASA firewall to use for a Cisco 1760. We have a couple desktops a Windows and an OSX server that could be used for a firewall. How can I configure the 1760 to integrate to the firewall for WAN access. I know upgrading to a 1900 or 2800 series...
I've been working with Mitel and Cisco SIP phones where it requires the user to dial the number then hit a softkey, whatever way, handset, headset or speaker. To me it's a PITA and if the network goes down on the backend, the set can still generate a "dial tone" in the virtual sense. Is this...
I'm a refugee from Avaya, and in a test environment I was able to dial out on a CM flawlessly, but I'm struggling to do the same for inbound calling from an analog trunk from a Comcast line. I like to dial this into a "ring group"-like setup. how can I do this?
Trying to find the clock battery for the said server, but the results from using my search engine leads me to the Smart Array thing, does this also store the BIOS as well? Can't seem to find clarity. I got a couple other ProLiants which have the traditional clock battery, which is why I am...
Folks,
Implementing a slightly older CME environment with an FXO trunk. Set up a dial peer, and other things I am trying to learn and the problem I am running into is when calling from the outside, you get a dial tone. (I'm hoping its from the CallManager and not the CO.) I did set up a...
I feel a new thread is in order to help me figure out Cisco UC systems. I come from the warm, user focused, Plain English world of Avaya to a condescending, jargon ridden, cold world of Ci$co and I am completely confused with the theoretical world and not the "real world" easy to understand way...
All,
I am new to Cisco (hence my handle, I come from experience of the TDM world) and I have no interest of paying Cisco for a useless CCNA cert. I'd like to ask the following questions:
I am interested in putting an FXO trunk on a Cisco Router (yes it's also a voice router w/ VICs) and route...
I could't find a generic category, but as I am working on a plan to get rid of that old IP Office that died last night; the plan would be get SIP phones running and get a SIP Gateway. Is there SIP gateways that can enable the other SIP phones to call one another and dial out on an analog gateway...
I had a customer contact me that an IP Office unit is not working after a major thunderstorm hit the location. Everything is working fine but not the IPO control unit. Well the thing is working for about 10 minutes, then reboots and there is an odery smell. This one was an SOE control unit.
I...
Last month, I asked if I could link an Asterisk to an Avaya IP Office on the same network. Now the Asterisk is going to be decommissioned, replaced with a spare Cisco 1760 Router with CME 4.1. It can route H323, and I have an IP Office that has an ATM card (16 channels) that possibly route these...
Hi all,
I have looked elsewhere online to see if I can use third party SIP phones to tie into the Cisco CME 4.1 app based PBX and I followed a string of IOS commands and now I got some problems.
the SIP phone can call into the CME and ring my Skinny 7940. I pick up the handset, I hear nothing...
Hi all,
I would like to merge 2 separate LANS to share a single WAN connection. The WAN is a residential Comcast cable line and one LAN is using a DD-WRT and another LAN is using a Cisco 1760 router. the DDWRT is also hosting the internet connection internally.
How can I make the Cisco...
Hi,
I like to know if possible I can assign a trunk to a single station and preferably use the same TAC (8) to dial out? I am already using 8 for another trunk. Both are using analog.
I am using a VMware Server 2.0 on top of Windows Server 2003 (not using ESXi) and I have 3 LAN ports on my server. I like to set up the ports because its set up insecurely (from what I know about VM networking.) I have a 100mb that I want to use for management, 2 gigabits (that I don't teamed) 1...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.