Search results for query: *

Hi guys we have a Mitel 3300MXE II running software version 8.0 v2. We also have a whole bunch of 6940 ip phones. None of these phone will conference in user with the join button. So user A picks ups the phone and dial user B. User A hits Add user then dials another number. Once they hit the...

I have to upgrade a MXE to version MCD 6.0 from version 5.2. I have 600+ phones broken up into 3 handsets each on very slow sites. So the firmware upgrades are going to take at least 8 hours. I wanted to speed up the handset firmware upgrades but moving the firmware from a version 6 unit into...

I have a Mitel sip trunking into a cisco call manager. The cisco is UC500 and in our sister office. Trunks work fine, calls between site sound great, I have no IP issues, nor firewall. The call scenario is like this: Cisco ----> Mitel vMBG----> Mitel vMCD----> Reception answer then transfer the...

Hi, I have one Mitel vmcd and one Mitel 3300 cxi. I would like to use the CXI embedded voice mail for the vmcd. I'm trunking via xnet and can make calls between the two sites. I can't call re-route calls on the vmcd to the cxi pilot because its not a really directory number. I have tried a hunt...

Hi All, I have been asked to connect our Mitel 3300 MXE to a PortaOne billing system. Link From what I understand PortaOne connects to Cisco and Quintium phone systems using radius authentication. It also captures calls stats using the same method which is why I've been asked to connect to it...

I have a Mitel MXE 3300 with 450 users two 30 channel ISDN service 30 sip trunks to 4 different phone system, and will be installing another 100 handset next week and 12 more sip channels on another from another carrier? I know the specs for my system are 1400 users but I still worried that one...

Hi All, I have been asked to sip trunk a Mitel 3300 with an NEC SV8100. Has anyone done this before? I've set my trunks up the way you would for a Asterisk box, but it just doesn't work. Any tips?

Hi All, I changed the SIP password with the carrier today, after the change the Mitel comes up with invalid username and password in the log and the trunk will not work. I used the Mitel username and password details in an ATA in the same VLAN which worked. So I know the username and password...

I have a Mitel 3300 running software version 5. I want to setup a duress button for the front reception person. She has a mitel 5324 handset with a 48pkm. I was thinking of using a button on the pkm that the person could press and the word "Duress" would show up on a few of the phones in the...

Hi, I currently look after an MXE that runs about 400 odd minet extension. Most of the handsets are remote and have about 600 to 1000 milliseconds round trip delay, I have an e2t card installed and all handset use the G729 codec. I want to turn the MXE into a gateway for ISDN then move the...

Hi Guys, I keep seeing the below error in my MBG server: "Milk error code:1 (E_MILK_FAIL - license signature failure), Max_channels:0, Max_users:5000, Max_transcoding:10, AmcLicenseType:teleworker, Keyname:mbg, VM code:0" When i check my AMC it show the below options: Option Value MBG Licenses...