Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. edgarquadros

    SIP Trunk TLS with MG100 / MG300 systems

    Hello guys! Does anyone have success configuring the SIP Trunk with TLS and SRTP between MG100/300 and the SIP Provider? I have a scenario here where the PBX and SIP Provider are failing in the handshake. I tested it in another 3rd party PBX and it works. After the PBX received the certificate...
  2. edgarquadros

    SIP Reverse Negotiation in 6700, 6800 and 6900 SIP Phones

    Hi! Can 6700, 6800, and 6900 SIP Phones support SIP Reverse Negotiation? If yes, someone knows how to set/activate it? BR, Edgar BR, Edgar
  3. edgarquadros

    Mitel 6800i series SIP Phones - RFC 2543 supports

    Hello! Does anyone know if Mitel 6800i series SIP Phones can support RFC 2453 and "Use Outbound Proxy in Dialog"? A customer has a 3rd party PBX that use this method to reproduce music-on-hold when a station put a call on hold or transfer calls. We have an example of Yealink SIP Phones working...
  4. edgarquadros

    Mitel 6900 series SIP phone works in 3rd party SIP PBX?

    Hello! In 2018 this thread thread1329-1783882 mention that 6900 phones with SIP firmware doesn't work with 3rd party SIP PBX. I never found the F.A.Q. document that mentions this. Is this information still valid? 6900 series cannot be used with 3rd party PBX? BR, Edgar BR, Edgar
  5. edgarquadros

    Fail on MX-ONE Repair Server / LIM procedure

    I have a MX-ONE 5.0 SP8 system, with 6 LIMs/servers, and the HD of Server 3 "died'. So, I replace the server and prepared it with new installation of MX-ONE files, to do a Repair Server procedure. But, when I tried to do it, I'm receiving the following error message from SSH, and the procedure...
  6. edgarquadros

    AASTRA BP250 Recovery Password

    Hi all! I found a thread here thread806-1724069 from 2014, about recovery BP250 password, and now I need to execute this procedure. I tried to found the files of the procedure, but the Dropbox link in the thread is broken. Is there anyone that has the correct procedure and files to do it...
  7. edgarquadros

    Issues in iPECS IP-DECT system GDC-800Bi / GDC-800H (RTX 8660 / 8630)

    Hello friends I'm having problems with iPECS IP-DECT system GDC-800Bi (O&M by RTX) connected with an iPECS eMG system. We deployed a MultiCell system with 14 base stations and 38 GDC-800H terminals in a factory, taking care of minimal signal strength between base stations to do "Air Sync"...
  8. edgarquadros

    Registering AASTRA DT390/690 DECT terminals in iPECS GDC600 DECT system

    thread1613-1752381 I'm trying to register this kind of terminals such as described in this post: https://www.tek-tips.com/viewthread.cfm?qid=1752381 But I'm not having success. The iPECS GDC600 is configured in the eMG80 system, and working fine with iPECS DECT terminals (GDC500H). But when I...
  9. edgarquadros

    No ring back tone in TDM extensions when dialing to SIP Trunk

    Hello friends! I'm having some problems in a customer with SIP Trunk between MX-ONE 6.3 SP1 HF4 (VMWare virtualized server + physical MGU v 2.5.4), and a GSM SIP GW used to calls to cell phones. Per example, when I'm dialing from analog or digital extensions to my cell phone using this GW, I...
  10. edgarquadros

    FTP transfer in CIL on HDU

    Hi everyone! I have a TSW with CIL on HDU, storing one file per day (DMPSIZ=4), and the file name has the format CILHDUYYYYMMDD, changing its name every day. I use a call accounting software to automatically collect these files, where it is configured to send mget CILHDU* command to effect the...

Part and Inventory Search

Back
Top