Search results for query: *

Been working on this for quite some time and now hit a brick wall, any help or advice woul dbe greatly received. Setup IP500V2 R11.1 ASBCE R8.0 Server edition running as an app server Customer security checks deem self signed certs as a security risk so ahve demanded we use an external CA...

Has anyone used Gamma SIP trunks with IP Office and an Avaya SBC? Seems to be no guides available, would appreciate any advice Thanks

Hi, Trying to get to the bottom of why the IPECS isnt getting check in check out information via the bi directional TCP port that is set ont the system. Are there any settings that specifically need setting relating to this feature? System is connecting to Guestline PMS. SMDR wrking ok on port...

Hello, I have recently installed a new IP500V2 running latest 8.1.67 software. Site had a BCM50 and I migrated the Nortel 1220's over to the IPO. Everything is working fine apart from the fact that extns cannot pickup other extns if rang internally. Externally this works fine. If I try...

I have a customer who has the above kit, when they press the directory key on their 5410 phones they cannot scroll to the letter "s". They can go to t and scroll back but cannot go directly to it by pressing the 7 key 4 times Tried a reboot anyone else had an issue like this? Any ideas would be...

Hello, I have a customer who has 2 mxe controllers one is a resilient unit for a main controller. They are clustered together with SDS enabled. The customer wants the ability to delete the MAC address of a phone from the system and therefore move the phone eleswhere under a different DN...

I am having issues with phone manager lite on terminal servers. On the whole it works pretty well but I have an issue with the speed dial internal members not showing their status i.e busy. Some users work and some don't and I can't find any logical reason why ths would be. I am using an ip500...

I am setting up Skype SIP trunks for a customer but having issues. The system is a 3300 MXe running on 9.0.1.17. The system has registered successfully the skype but when trying to dial over the link it comes up "access denied" and has a message in the logs "Authentication failure - 403...

I'm getting an error: IP NETWORKING - MIPS PORT 2, down IP NETWORKING - MIPS PORT 2, 100M FULL duplex This is happening through out the day, Any ideas what would cause this and how to fix. regards

Mitel 3300 , MCD 4.2 , whats the best PC spec for the 5550 to run on.

I have a programming issue on a 3300. Scenario DDI number is 465584, trunk attributes are stripping the first 2 digits off, and the system is a 4 digit number plan. 5584 is an ARS entry (so not a physical DN), so when dialled routes through via BRI link to a DeTeWe OpenCom 130 Dect unit...

Hello I have 2 IPO linked with SCN enabled both on version 7.0 (12). Both sites have 9620's. The fault I have is when an external call comes into either site and they transfer to the other site the call is cut off after a few seconds. The call still remains at at the person who answered the call...