Search results for query: *

Has anybody configured the Lantronix UDS-10 device server to work with the Definity over the terminal port and then access with ASA? I have a Precidia on my Definity in Denver that works great. Can't seem to get the Lantronix unit to work though. Any help would be greatly appreciated! Thanks...

Does anybody know where I might find a list of Unicenter agents and their definitions? TIA, Gary <><

Does anyone know if CA has a technical document on the Management Portal? If so, can you post the link? Many thanks!

Forumers, I'm new to the Unicenter NSM product but have been certified and involved in OpenView for many years. As I begin down the Unicenter path I'd like to hear from the forum members regarding the pitfalls of deploying Unicenter, and how to best avoid them. My company has invested heavily...

Hi! I've just completed setting up a DS1 TN767E card with a 24 member trunk group. When I make a test call using the Trunk Access Code the call only stays up for 3 minutes then drops. It only happens when I initiate the call. I've reviewed the timeout values in the trunk group...

I'm working on a pilot project to get our internal voice traffic moving across our private ATM network. I've installed a TN767E, setup a trunk group with 10 members following Cisco's configuration documentation to the letter. I found information on this forum on how to pinout a Cat 5 from my...

I just added a new DS1 TN767E card to cabinet 1 in slot 12 on my G3. When I do a 'list config all' the card is displayed. I created a new trunk group for this card and am trying to add members to it. When I attempt to add member 01A1201 I get the message 'Must use administered DS1 or UDS1...

I am trying to use an asterisk for a pause in my speed dial lists between the number being dialed and the long distance trunk access code. There needs to be a 3 to 5 second pause before the switch out pulses the 3 digit access code in order for the LD carrier to accept the code. When the line is...

Okay UNIX gurus, I'm at a loss. I've written a /bin/sh script that places ftp commands into a 'for' loop that appears thusly: for FILES in `ls directory/` do `ftp -n server <<eoj user name password lcd localdir cd remotedir binary put $FILES bye eoj` done The script works just fine, but after...

I'm working on a project to use the TN760D circuit pack in an E & M configuration with our Cisco router VIC (Voice Interface Card) to provide toll bypass in a 'hybrid' VoIP solution. First question: Has anybody out there done this? Second question: How do I link the TN760D card's 4 ports to the...

Can the TN760D tie trunk card be installed hot (i.e. while the switch is up? Thanks!

I'm brand new to this forum, mostly out of necessity. Here's my problem: I configured a second attendant console on my switch yesterday. Now, due to some mis-communication I need to remove it. The system refuses to let me remove the config. I get the error: Object in use; please try later...