Search results for query: *

I am working on a 6509 distro switch and attempting to configure an etherchannel group on my supervisor module. I configure the port-channel on both ends to mode on. It is passing traffic but it shows two separate interfaces like the following: Port-Channel5 Port-Channel5a Is this something I...

Any idea why this switch only boots into rommon? New_Main_Switch#sh run Building configuration... Current configuration : 13764 bytes ! upgrade fpd auto version 12.2 service timestamps debug uptime service timestamps log uptime service password-encryption service counters max age 5 ! hostname...

I am trying to mount a 4.o terabyte usb drive on a xenserver running version 5.6 SP2. I am getting an error that states the request could not be performed because of an I/O device error. That error is in the VM. I check the logs on the Xenserver and I am getting the error "Internal Error...

I have a 6509 running IOS 12.1(27b)E4. I have installed a WS-X6148A-GE-45AF module. The module status shows unknown and the state is PwrDown. I cannot get this module to power up. I have 956.16 watts available and the hardware matrix shows this is compatible. Has anyone run into this before...

We have several Windows 7 professional 64 bit machines on our domain that log the user off and reboot right after login. Some of them do it more than once. Once the user gets through this, there are no ill effects. Is anyone else experiencing this? Jim Rapier "Money can't buy happiness, but it...

Does anyone have a working layer three switching config they would be willing share? I have a layer three central switch, with 9 layer two satellite switches and I am attempting to utilize multiple vlans. I cannot seem to get the vlans to communicate with each other. I can see the packets get to...

I have a 6509 chassis with a 16 port 1000mb GBIC ethernet port and have just purchased a 3560 switch with two 10 Gig E x2-10GBSR modules in it. Is there any way to configure these two port to connect with each other. I have trunked and verified native VLAN but I am unable to open the ports. Is...

I have configured and implemented a 6509 main switch as our main switch. It feeds 9 catalyst 3550 perimeter switches. My question is in regards to the supervisor modules I have installed. I have redundant Catalyst 6000 supervisor 2 modules. They both contain 2 fiber interfaces. They also have...

We are running a exchange 2003. I have about 90 users on the network. I have several office 2010 clients as well as office 2003 clients. 99% of them work fine, I have 1 user on office 2010 that has all sorts of outlook issues. It intermittently takes a long time to load his email profile and...

We are running ISA 2006 on a Server 2003 SP2 machine. After the last batch of updates our Windows firewall service as well as the ISA service do no start automatically after reboot. Has anyone else seen this or is it just localized to my universe? Jim Rapier "Money can't buy happiness, but it...

We are running a legacy Merlin Magix setup. I am running WinSPM 9.0. The issue I am having is with a call transfer issue. If a call is transferred to an extension with call forwarding set up, the call never makes it to voicemail. I rings roughly 5 - 6 times and is then rerouted back to the phone...

I am trying to open port 1527 on ISA 2004. I have allowed all inbound and outbound traffic on this port, yet my port tester shows that the port is not open. Here is the rule I have set; Allow, All Outbound Traffic, Internal Local Host, External, All users, with port 1527 manually input. Did I...

I have a 6509 chassis with redundant supervisor modules #WS-X6K-SUP2-2GE. My secondary module has lost its mind and just keeps cycling, unable to boot. I cannot console into the console port to alter anything and cannot break the sequence. The reset switch just cycles it through to the loop...

I have a 6509 modular switch with redundant supervisor modules. I have inadvertently pointed the backup sup module and the incorrect boot file and now it just keeps looping and says it cannot find file. I cannot seem to break the sequence. Is there a keystroke I am missing, can I hotswap it and...

I have a user with a quad core 16 gig hp laptop with 64 bit windows 7 professional. It has an oem copy of Office 2010 on it. All of the functions work, but Word and Excel take roughly 2-3 minutes to close. It does not matter if there is a document open or not. The process does not consume any...

I have set up snmp traps on 6509. It shows that it has sent 771 traps since I have set it up. I am unable to set up a server to recieve these traps. Is there a simple way to see what these traps are saying? I am using server 2003 or windows 7. I appreciate any help

We are running a 6509 switch with dual sup 720 module and a 48 gig port module. It is our main networking device. All devices are in the same vlan. The issue we are seeing is deathly slow file transfers over the network. The input rate is 10 packets/second and the output rate is 2...

I have a user running a copy of 2010 pro. It has full functionality, except when closing the application itself it hangs and takes 45 - 60 seconds to close the window. It is on a Windows 7 64-bit box. I have reinstalled the application, repaired the installation, checked to see if there are any...

I have a 6509 with dual 720 sup modules. I am trying to switch input preference to SSH and it does not appear to support it. Any ideas? Here is the version I am running. Main_Switch#sh ver Cisco Internetwork Operating System Software IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version...

We are running WinSPM 9.0 with 4420D+ handsets. I am trying to forward an extension to an external line and have them ring concurrently. Right know, the phone forwards, but there is a 3-5 second delay before the cell phone rings. Is there any way to alleviate this?