Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: cayres1003
  • Content: Threads
  • Order by date
  1. cayres1003

    fax over PRI with Netlink

    I have 3 sites all netlink'd together and 3 sites hanging off through ccis. I am having problems with faxing all around. Apparently sending seems to be working, but inbound is problematic. I have enabled 84-33 profile 1 for NetLink and CCIS. Anybody have a similar problem.
  2. cayres1003

    9100 cpu20 sip trunks, 2 new locations

    New install. 2 locations using AT&T sip trunks. The ATT router is an edgewater router at both. We have a fortigate firewall between us and them. In bound has been working without fail. But the inbound is sporadic at both sites. I can go 1 day or 5 days before we start having issues...
  3. cayres1003

    outbound caller id over CCIS

    9100 ccis. Got a remote site that I am forwarding a vrt ext to a cell phone. Main site has the trunks (pri). We have control over outbound caller id. calling the ext that is forwarded from another ext works fine. The correct caller id shows up. But if an outside caller calls in directly...
  4. cayres1003

    8100/9100 dial analysis table CMD 11-20

    Just want to get some feedback on how you interpret CMD 11-20/44-02 my scenario is CCIS and the need to break out particular ext numbers within a range. Like 5105 needs to go F-route and the rest of 510x number are exts I will send 51 to Dial Analysis and then make the breakout for the range...
  5. cayres1003

    9100 ccis - mixing ip-ccis and T1 ccis

    guys, I am having to mix up ip ccis with 1 single T1 ccis. I am struggling on the cmd 50 part. Normally I have either one or the other,but having both in the same pbx is throwing me off a bit. I guess the question is with 50-02 and 50-03. here is the config as I have it now. CMD...
  6. cayres1003

    9100 - cmd 15-14

    I have a question regarding cmd 15-14. What is it used for. I never look at and I have never specifically programmed it from web pro or pc pro. Also, does anyone know if we can expand personal station speed dials bins? give an ext more than 10 bins.
  7. cayres1003

    9100 DID mode switching

    Here is the scenario: 1 pri. 1 location. 2 departments. In the beginning, I let 1 of the departments use the standard mode switching using their Night mode button during the day for break/lunch. I also put them on normal automatic scheduling in cmd 12 for start of day and end of day...
  8. cayres1003

    Sv9500/8500 LCR

    I have been having some issues with a customer's LCR regarding a specific area code. Our carriers in the area, ie verizon, tmobile, att, etc have finally moved us to forced 10 digit dialing. The 9500 was setup for 9140 for long distance and local 94. I have gone back and built out for the...
  9. cayres1003

    pgd adpaters 8100.

    I am trying to setup ringing over paging speakers. I have 2 pgd adapters. I have 3 zones of paging. I need to add ringing over the external speakers for night mode. I see that you can set a channel on the pgd adapter to ring. Has anyone ever set that up before?
  10. cayres1003

    station to station block - 9100

    Does anyone know how to block ext to ext dialing with in the same pbx. I thought maybe there was someway that you could do it through COS but i can't seem to find anything. I am trying to separate 11xx and 12xx completely. I don't want either of them to be able to dial one another.
  11. cayres1003

    ipk II pgd adapters for door phones

    I have an old IPK II that had 2 door phones. I had 1 single pgd adapter on port 7 of an esib/e combo card. Both of the door phones were working fine. I needed to add two more door phones. I learned that plugging up another pgd adapter to the same esi card doesn't really work. Only 2 door...
  12. cayres1003

    8500/9500 question on No Answer timer

    How can I set an ext to have a different NO answer timer? And then how to do I set that timer?
  13. cayres1003

    Hotline on SV9500

    I have an analog ext assigned to tec_14. I setup ahls for station to test with. My station is 5240, I chose type = 1, I set "con tn" = 1, and "con station" = 5548. When I go off hook on 5240, nothing happens. is there another setting that i need to enable. Ultimately I would like to have...
  14. cayres1003

    SV9100 Sip trunks to Avaya system

    I have a customer that we are trying to tie 3 avaya systems to the SV9100 via sip trunks. We have 1 avaya system as our inbound/outbound and ext dialing - registered trunks and they are working. I tried to do registered trunks to the other avaya systems with no success. So now I am trying Sip...
  15. cayres1003

    SV9500 how to put a name on an INBound DID number

    I need to put a name on an inbound DID number.
  16. cayres1003

    9500, set inbound main number to AA

    So I just took over a 9500 which I don't normally work on, but I can get around,and I am needing to change the main inbound number to goto an Auto Attendant. ... Forgetting the VM side of things, I am trying to figure out how to move the main number. I checked ALDN (LLDN for a list up)and I...
  17. cayres1003

    communications analyst on the SV8100

    I have 2 issues. I just re-installed this for a customer and I can't get the caller-id inbound to work. I also can't get any of the web reports to show anything. When I click on a web report like Detailed calling by extensions, it doesn't even try to open anything. Is there something that...
  18. cayres1003

    communications analyst on the 8100

    Does anyone remember what the license port is for the Communications analyst. When you first start it up for the multi-site configuration it will ask the license server ip and the port. It has been years since I have looked at this and the manual seems void of the port number. I am assuming...
  19. cayres1003

    ipk II

    Can someone remind me on the IPK II on In-Mail, were those ordered with the ports we needed or did we have to put a license on the cpu for the number ports. I can't find my old parts book to look that up. I was thinking I put a license on the system, but we may have ordered them with the port...
  20. cayres1003

    8100 to spectrum for aip trunks

    I am having a hard time with getting some spectrum sip trunks working. Has any one done any with them on an 8100 ..... Static setup. We r using default IP addresses in 8100. Gateway 172.16.0.1 is their SBC on site. Pbx is 172.16.0.10. no Nat needed. I have setup the following minimum...

Part and Inventory Search

Back
Top