Search results for query: *

can anyone tell me what the usb port is for on these phones... Some of our users have found them and want to plug them into their pc's I cant find anyting in the optipoint manual or the realitis manual...

Hi all, I have recently started to recive the following snmp trap from a test 2940 to my test NMS (SNMPc) i guess it shows that my NMS is telneting to the 2940. I havent changed anything config wise and the test network is completely isolated. Any suggestions why its started sending them, and...

Hi all, I have a 6509 and i only want to monitor the status of the fibre ports in the supervisors but if i turn on linkup/linkdown in the snmp traps config it turn it on for all ports. i can turn it off for all ports that i dont want with "no snmp trap linkstatus" but this makes the config...

Hi, Just a quick question regarding ACL's on catalsyt switches.... I need to create an access list for SNMP NTP and Telnet from restricted hosts... do they need to be in specific ACL list numbers or can i simply have access list 1 SNMP, access list 2 NTP etc Many thanks Matt Jenkins

Hi, My organisation is looking to get Ciscoworks 2000 for config up/download, inventory and other bits and pieces... Could anyone tell me roughly how big the ciscoworks database is per device....... We have approx 350 plus devices and we just wanted to roughly size the server capacity/backup...

Does anyone have the MIB file for the DX (runing ver 8.0) Regards Matt

Hi, We have recently acquired 2 828's that we are going to use back to back on a BT EPS9 CCT to bridge two sites. The two sites will be on the same subnet so they will not need to route any traffic as the WAN router will route traffic to the rest of the WAN. Is there a config that anyone can...

Hi, Could anyone point me in the right direction of a free Windows Tacacs+/Radius server for 10 users to authenticate against 350+ Cisco Devices Many thanks in advance Matt

We have a problem with 3 brand new catalyst 4948 (IOS 12.2(20)EWA We are not using IP routing, and have therefore used the "IP default-gateway" command.This appears to accept, however 2 things are still absent:- "Show Ip Route" results in "No default route" and the "IP Classless" command is...

Hi all, I have a 2948 with two GBIC's to link to others recently ive had problems with some 2948's whereby the gbic link disconnects and wont come back up. i have temporarliy replaced these with 3500's on test i connect the gbic and the port comes up then about 15 seconds later is will go...

Hi, i have two identical Catalyst 4003's (same hardware, software, memory etc) on the first one if i type any command and press enter it sometimes freezes my telnet session. other times it will be ok. it doesnt seem to be a command related problem as i can issue a multitude of commands and it...

Hi all, I have a problems with a couple of PCs that are running NT4 with IE6 When you close down IE6 sometimes the Iexplore.exe process continues to run. Does anyone know why this happens and is there a fix for it?? Anyhelp would be apprectiated. Cheers matt

hi, Hope someone can help i have a user that has dreamweaver 3 installed (old i know but corporate standard) the problem is they dont have any toolbars only the standard file menu. is anyone able to point me to the option to bring the default toolbar back??? cheers in advance

hi, can anyone help me. im trying to setup DNS name resolution etc on 2600, 3600 and 1600 routers. but i cannot find anything (easily) on how to do this? many thanks in advance matt

Hi, I need to move my DNS database from one server to the other but the only documentation i can find says you need to change the ip address on the new box to the ip address of the old box. can you move the databse to a new server witha different ip address?? Many thanks Matt

Hi, we have been using epo2.5 now for a while but the documentation we wrote (not me any way) is pants. so i built a 'test' server installed epo etc fine. BUT i have come to install the packages. i direct epo to the NAP files for vs 4.5.0 and netsheild 4 (i think) but it says its for a previous...

Hi, i have recently removed a machine from the network and therefore removed it from epo etc but when i run any reports that machine still appears. Does any one know how to remove that device?

this has probably already been awnsered but does anyone have any code/websites for code so i can have a username/password to access a program in vb.net. many thanks in advance matt

hi, i was given a sparcserver20 by a mate so i can play with solaris but it only boot on the console port how do i cahnge this so it boots on a moniter?

hi, im new to solaris so please bear with me. i have to rebuild a solaris server which is running as a DNS server. does anyone know how to install a dns server? does it already come with solaris? any feedback welcome matt