Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mikemateoisc

    APC Symmetra 12KVA Power Array

    Hello All, I just recently purchased APC Symmetra 12KVA Power Array. The problem is I purchased it from Ebay, this system came in with out batteries. Does anyone know what type of batteries go in the APC SYMBATT Pack? PLEASE HELP!!!!! Greatly appreciated!
  2. mikemateoisc

    ATL M2500 CRC Error!!!!!HelpHelp!!!!

    Hey all I can really use some help. I have a ATL M2500 tape library that will not boot up. on the op-panel it reads BOOT CODE 3.00 and right under it it reads CRC ERROR. Can any one point in the right direction to fix this problem? Thanks have a great day!
  3. mikemateoisc

    IBM LTO 3 serial interface

    Hey All, Does anyone know what program can I use to view the IBM LTO 3 drive via serial communication? I have a program but it limits me to IBM LTO 1 and 2's. Any suggestion?
  4. mikemateoisc

    IBM LTO cleaning tapes

    Hello to All, Well I just purchased a few IBM lto universal cleaning cartridges. My question is since I purchased them off Ebay, How can you tell if the tapes are new or not? There are supposed to be brand new, but they didn't come with cases. Thanks in advance guys!!!
  5. mikemateoisc

    STK 9840A fibre ID issues

    Hey Guys and Gals, I've been encountering issues with 9840A fibre drives. When I connect to my desk tops,4 different ones via fibre HBA. I find that two PC's will allow my STK SCSI tool box to view the drive. The other two PC's are not. What I noticed was in Device Manager the ID locations for...
  6. mikemateoisc

    Seagate LTO 1 serial connection pinouts

    Hey all, Having a great day hopefully!! Well I need to know if any one knows what is the pinout for the Seagate LTO 1 is. Let me be specific, I need the pinout from the rear of the drive and the serial pinout to 5Pin din connector that connects to a RS-422. Please all if you can help me let me...
  7. mikemateoisc

    Pioneer DRM7000 HELP PLEASE

    Hello All, Does anyone have experiance in the Pioneer DRM7000 Optical jukebox? I would like to know if you have to reboot the server (which is win 2000 server) in order to see the new hardware?
  8. mikemateoisc

    Storagetek blade ctlr 150 and 250

    Hi Everyone, I have a Storagetek blade ctlr B150 and I'm trying to figure out if I can use a Storagetek blade ctrl B250 ESM interface card. Would The B250 ESM card work on the B150? Also does any know if a D178 controller will work for the B150 array's?
  9. mikemateoisc

    SL500

    Hey All, I have a know good robot, but I can't get the tray to move. I tried leveling the tray with a level. I made sure that all sensors were triggered. Is ther any thing else that I should keep in mind when working on the SL500 robots?
  10. mikemateoisc

    STK L700 MPC board HELP PLEASE!!!!!

    Hey All, I have an STK L700 Library no expansion unit. I recently tested an MPC board on the L700, during my test I found that the hand will perform all steps of the init process until the cell audit. During the cell audit I notice that the hand will attempt to read the drive frame on the...
  11. mikemateoisc

    Smart UPS 3000

    Hey Everyone, Hope everyones doing pretty darn good!!! Well the reason why I'm here is because of my Smart UPS 3000, it has a no charged battery light. When I tested the Voltage it read 13.8 V across each Battery (total of 4), then I messured across all four which was 27.6V. I know the...
  12. mikemateoisc

    9840 A tape loaded but system doesn't recognize media.

    Hey All --- I have a 9840 A tape drive and when I have media loaded into the drive the library doesn't recognize that the media is installed. Is there a quick fix ? Is it possible that one of the cards are bad?
  13. mikemateoisc

    HELP!!!HELP!!! Flexline 680!!!!

    Hi everyone, I seem to be having a hard time issuing commands to the Stk Flex Line 680. I'm woundering if there is a list of commands for the disk array? Aslo I can't get passed the help command. When I type help I see a list of descriptions that read: Descrption, parameter, verb...
  14. mikemateoisc

    LSI Engenio 2882,2880

    Hello All, I Seem to have an issue when I connect my LSI Engenio 2882,2880 to hyper terminal with a db-9 PIN SERIAL CABLE. I can read the controllers but I can't access the shell with the password that was given to me. Does anyone have default password I might be able to try and access the...
  15. mikemateoisc

    EMC Clariion navisphere 6.x software

    Hey Guys, I need to locate the software For my EMC Clariion CX300. I need to to know if I can use a different type of application and were can I locate it?
  16. mikemateoisc

    STK 9490 RSI SCSI card

    Hey All, Can Anyone tell me if this board is HVD or LVD STK 9490 RSI SCSI card? Part Number is 308957507. I don't want to blow my interface card by installing the wrong type. Thanks
  17. mikemateoisc

    help please

    Does any one have any knowledge in the brocade silkworm 3800?
  18. mikemateoisc

    CAn some someone help me please

    I have a EMC clarion DAE-2 disk array. I would like to know if you have to have the head to control it or can you connect directly to a host?
  19. mikemateoisc

    9840A WWN configuring?

    Hey All, Does any one have a configuration manuals for thw wwn for 9840A?
  20. mikemateoisc

    HP, IBM, AND SEAGATE SCSI ID'S

    Hi Guys, I am trying to figure out if there are certain scsi id settings for each drive to a library. Ex. (seagate scsi id X for a STK L20 library.) The reason I ask, is on the back of the tape drives there are jumper settings and it looks like most of the drives are set from the manufacture...

Part and Inventory Search

Back
Top