Search results for query: *

It looks like it's new battery time. The client has done a hard restart. I already know about dip switch 8 to default the system, but have I lost the system configuration and need to reprogram from scratch? Also, is this a battery I can just go to Walgreens or such and pick up?

I've found it before under tech support - software, and can program TDE and TDA up to version 6. I see the USB drivers and the other consoles on the site but no joy for the UPCMC. [sad] My installer is version 7.4.1.0 Where do they hide the latest version? [ponder] TIA!

This is a new client for me. The system is an old ACS V4 with two 206 cards and a Voicemail. It's been up and running for years. Client called - system had one red light on processor and no lights on other cards. I had her replace the batteries and do a power cycle. This cleared the error and...

This is what I've done so far: System reset Changed all 6 lines to tone Programmed all 6 lines to one phone Tested known good CO to each of the 6 lines Tested on more than one extension Here's what I get: Calls coming in - ring and when answered, from the Nortel set - incoming voice is...

I RTFM and there is no mention of this issue. Is the 19" rack mount for the NCP500/1000 adequate grounding for the system if the rack itself is fully grounded or do I need to install a separate ground to the system's ground screw? TIA!

I have a client that wants to be able to page to his wireless phones (kx-wt125) The *33 option only pages desk sets. Is there a way to page to cordless phones too? [ponder] This is a TDA50G system with 5 WT125's and 3 DT343's. TIA!

Got a TVS50 hooked to a TDA50 - was working fine for years. Now I get no response dialing it and hooking up with Hyperter minal gets me only "Checki" that is repeated every minute. No login or password prompt, no blinking power light, no boot printout on the screen after a power up. Is it dead...

I have an older couple client that currently has a Panasonic TDA system. What they have a problem with is this: Call comes in and he answers on ext 1 She joins the conversation (conference) and then after a while he hangs up. On the TDA system this will terminate the call unless transfer is...

I have a client with a TDA100 in their big house. Yep - 10 extensions. They want to be able to pick up a second phone to join a conversation so both grand parents can talk to kids at once. I know that they can use the Busy Override feature, but if the person who answers the call hangs up, the...

I have a client with a Spirit 308 - The system suddenly stopped dialing with tones and reverted back to pulse. I have done the admin feature 7 thing to change it - but the system does not seem to want to take the command. It will only dial pulse. Any suggestions? Did the tone generator burn...

I have a client asking me to come and look at a Nortel RD-1987 6-line system. I've looked on the Nortel site and searched manual sites as well as Google and Bing with no mention of this system. Is this something that is so ancient that it was never mentioned on the net? Anyone heard of this...

I'm going to need to go on-site anyway, but I was wondering if there was a way to know if there is a tda5196 remote access card installed through the programming console? I've looked through the Unified programming console, and not found any mention of it - am I missing something? I'd rather not...

Hi - I'm looking to list a TDA200 on ebay and was wondering how much I should charge? It's an older v1 cabinet/motherboard that did not need the password from Panasonic. It currently has v2 software running with a large power supply. I have other cards for it but am listing them separately...