Search results for query: *

When pressing the directory button on my i2004 phone, I only get intermittent access to the Corporate Directory feature. I have to press the Directory button several time before it displays/or "connects". Running 4.5.88, CS1000 CoRes, CND 2.1 and TM 3.1. Once it's displayed/accessed, the...

We have cs 1000 system with BMG at a remote site. We are running 4.50.88. The only way to enable the channels is to use .enlu, and even when enabled I get a one-way speech path going from TDM to IP. We are running the patch referenced in other postings (p20962_1.lsa). Below are some of the...

We have a CS1000 with 4.5 with a PRI and we are getting telemarketers calling all the time, using at least three different numbers. Thanks in advance.

i2002 & i2004 phones cs1000 w/4.5 PRI Inbound call to phone - CID works Inbound call to phone, forwarded to another internal phone - CID works Internal call to internal phone, forwarded to external phone (cell phone) - CID works Inbound call to phone, forwarded to external phone (cell phone)...

Can anyone tell me what must be configured for me to start using Virtual Office? We use i2002 and i2004 phones. Thanks in advance.

Is it possible to password protect the configuration menu only of either the i2002 or i2004? I would like to have the phone function in all other capacities normally. I'm just looking for a way to keep the phone from being reconfigured to work at a different location. We use different voice...

I'm trying to document the serial numbers of my signal servers. Can this be done via CLI or Element Manager and if so, what Overlay do I use? Or do I need to visit each location and read it off the label? Thanks in advance.

When I do a ld 60 on my pri loop I get the following output: .stat 3 PRI* TRK LOOP 3 - ENBL FFMT/LCMT/YALMT: ESF/B8Z/FDL TRACKING SERVICE RESTORE: YES YEL ALM PROCESS: YES ALARM STATUS : NO ALARM CH 01 - BUSY DID 3VCE * CH 02 - IDLE DID 3VCE * CH 03 - BUSY DID 3VCE *...

We have a CS1K at rel. 4.5. What is the difference between an UNREG IP phone and a LOST IP phone? Signaling IP x.x.x.x:5000 Media IP x.x.x.x:5200 CUST 00 TN 144-00-01-23 TYPE i2002 ZONE 001 LOST Key DN CPND Name --------------------------------------------- 00 SCR 3614...

After changing passwords, I am unable to transmit changes made via TM between BMG and PBX. The change never transmits, BMG view in TM remains in a change state. The transmit logs give; Failed Logon Attempt! I've verified that there are no others logged in. All help is greatly appreciated.

Is there way to list TN's of IP phones (Virtual Loop) that have been disabled? Running .stat gives me how many of each, but not the specific TN that has been disabled. Currently, I'm using TM to note the disabled TN's, using the name fields, however, I would prefer a CLI option, if it is...

How is a Group Hunt terminated should no one pick-up? I'm using Linear Hunt. Currently the Hunt just keeps on Hunting. I thought that the Hunt would terminate on the last DN should no one pick-up, I'm sure I must have missed something. >ld 20 PT0000 REQ: prt TYPE: dnb CUST 0 DN 5800 DATE...

Is there a way to have the Set Lamp flash when set to SCNR? The same as in SCR when the phone rings, only without the ringing. Using Nortel IP phones: i2002 and i2004. What I would like to do is have the phone "flash" the Set Lamp, but not ring.

Is there a way to have a Group call terminate when any group member answers the call? Considered Group Hunt, however, in a large area with the call hunting around the room it can be a very long process for the caller, who may get tired of waiting and hang up, and whoever is available in the...