Search results for query: *

Hi, I have an IPSEC tunnel from a remote site that accesses a particular host on the dmz. That host now also requires Internet access (not necessaeraily at the same time) object-group service webservices tcp-udp port-object eq www port-object eq 443 port-object eq domain exit access-list...

Hi Currently I have 2 * 3560 switches each connected to a trunked router, the 2 routers connect via MPLS between the sites the 3560's are not currently configured for routing. I have the opportunity to connect a 100mb poini to point connection directly between the 3560's. I plan to connect the...

Hi, Can this be done if so how? I have a cisco asa with multiple external IP addresses and typically i configure static mapping between external address and a number of specific internal hosts using differrent ports. Now I need to allow 2 or 3 external hosts access to approx 50 or so internal...

Hi, Hi I have one ISP (with ADSL Backup) which provides a 10MB ethernet connection, I would like to provide router resilience , I was thinking of connecting a switch to the ISP connection and then connecting each of the 2 routers to the switch and run HSRP for the clients on the LAN. The...

Hi, Fairly new to frontpage, I have a few questions that hopefully someone can answer. I am using themes for page layout/design. 1. I created a company logo but i want it in the centre of the screen rather than top left, how can i move it? 2. If i want to make the box or border down the left...

Hi, I have a couple of 3550 cisco switches connected via a layer 2 external network. Only vlan's 501-504 are allowed to pass across the link and I believe they all need to be tagged. I can pass traffic across the link ok, i can telnet between the switches ok but I cant get CDP info across the...

Hi I have a PIX configured with an existing isakmp policy 20 for pix to pix use I want to add Cisco client VPN access however all of the examples I have seen specifying different setting than already configured. Can I use the same ISAKMP policy will the cisco vp client support 3des sha...

I have an aging 4006 with L3 card, a 4506, and one 4503 both with different supervisor engine cards. They are connected by one link from the 4006, the floor switches then connect to either the 4006 or 4506. I would like to provide some resilince in the past I have had the luxury of having two...

I would like to provide power for some Mitel IP phones using Cisco switches apparently 3550's are no good anyone know which switches are ok for Mitel Phones e.g 5220?

I have a 3500 switch running as a client in a vtp domain with a trunk linking to a 4506. I would like to replace some hubs onto the switch but I need to segment 2 or 3 ports so they do not communucate wirh aything other than the ports I want. Any ideas?

I have a SBS2003 server however the change user permission wizard complains about setting rights on the sharepoint site (0x8102004a) failed to add user, plus error 0x800004005 failure to set properties on the account. Also when using OWA you get error messages access denied or unknow symbol...

I am using scan32 to check/clean viruses but each time it finds a virus in the log I get the following message. Is this normal is it cleaning the virus, if not what needs to be done to ensure it cleans ok? ======================================================== 10/30/02 10:01 AM Infected...

We have 3 w2k servers sp2 with 4.5 sp1 netsheild installed the system scan disables itself eventually. If i copy files from a cd to the server it comes up with the same error. I have tried increasing the scan timeout with no sucess. ===========================================================...

Hi all, I have set up RRAS on win2k(sp) I can login in and use the vpn from a Win2kpro machine, IP and IPX work fine. If I try the same thing from a Win9x machine, i get blue screen (or reeboot). Interesting thing if I dont have the Novell client I can log in ok but using the ms client for...

I have 30+ clients connecting to an E2K server, 3 of the machines are Win2k occasionally on starting outlook2000 a error message is displayed saying the exchange server is unavailable, if I click retry all works ok. To my knowledge it has not happened on the Win9X machines (same client). I have...

I am trying to set up team folders which allow a shared schedule for a group of people, one of the steps requires that the public folder home page is published on either a shared folder or a web server. If I want to publish it to say the public folder or to the OWA server how can I do it. If I...

Anyone managed to disable this option ok, I found a Msoft article Q288119 but it did not work.

I have one E2k server which is working fine, I have installed another E2k server it is in the same routing group, I just moved one mailbox onto the new server and I can access the mail ok but cant send or receive any new mail. The smtp connector is in a state retry, I have tried forcing the...

I have an exisiting msmail installation with MHS gateway for Internet mail. Two problems one is although I can send and receive mail from to e2k server there is no listing of users accounts in either the msmail GAL (the network and postoffice appear) or on the e2k server. One of the existing...

Currently my internal users access the web through a Bay firewall, I have just installed a PIX, when I try and resolve web sites it fails. I would like to use the external dns same as before. Presumably I need to stop the PIX translating the internal to external address for the external dns...