Search results for query: *

Hello, I have configured MG SIP for the SIP trunk between Cisco CM and NEc Sv9500, presenlty i am facing a issue to make an outgoing call from Cisco,which should seize PRI trunk (routeRT120) from NEC(but local calls are going trough Route 21),problem with National calls,which is not going...

Hello everyone, wants to know which is the command to show extension number on display when the phone is idle. i can see the extension number when i pick up the handset.

Hello, I have connected a Polycom sound station with SV8300 as a third party SIP, i am not able to make a conference call from this. I am following the below procedure: 1.make a call, once the call is answered 2.press conference button 3.make a new call, once the call is answered 4.press again...

Hello Guys, i have SV8300 systems working on CCIS over IP: Site A is a main office with PRI line connected and Centralized Billing (ma4000) is working. Site B is a remote site . Site B is receiving a call from PRI, but i can not see the incoming calls on the smdr tool, or ma4000. but i can...

Hello Everyone, if you could suggest me in SMDR output on PRI line, calls made from an extension and transferred to another extension, the output is ITRS. if any incoming call from outside answered then transferred to another extension, the output is ITRS, how to differentiate the call is...

Hi Everyone, I have SV8500 PABX, 1. I have assigned CO lines as HOTLINES programmed as one touch buttons on the Phone. 2. I am using PAD lock on the phone, but I am still able to make the calls from HOTLINES. 3. how can I block the hotlines after PAD lock. Thanks in Advance.

Dear, i am trying to bring up neax 2400IPX ( I have Dual CPU), i have installed R26 version in the PCIA card through FLVCTR from MAT tool, and i plugged on the cpu slot,sense switch in position '1',swicth on the power and i can see indication CPUOPE lamp green steady, and changed the switch...

Dear, I have issue with 2000IPS for Missed call Notifications, i can see number calling from outside, but its doesnt show in the missed call notifications. i am using Direct Line Appearance. it possible if i use DIT for one physical station. any suggestion?

hi, can we use Old NEC Aspire Phones(ie-IP1WW) with NEC SV 8300 system?

Hi, I have Installed DECT phones around 53 handsets(C124), with 20 access points, with SV8100 system. I have problem that some extensions automatically goes busy, no one can make a call to it, it gives busy tone, but we can make call from it either external or internal, so what i do to resolve...

Hey, i have a question, i have programmed pad Lock with authorization code, the station gets restricted for outgoing calls but not able to use station speed dial or system speed dial. is it normal or we can allow station to use these feature after the Pad Lock+Authorization code. all are in...

HI, is it possible to make conference call on sv8100 for co trunks, and i shouldn't be able to enter into the conversation by pressing the trunk key button which blinks after i transfer?

Hi, I have connected Exteranl Music on Hold for sv8300 system, i get music for external calls but for intenal calls(station to station),it doesnt work. CMD: 480>00>1300 480>01>1300 480>02>1300 One more thing is it possible for the External Music on Hold for CCIS link between 2000IPS and SV8300...

Dear, I Have Programmed SV8300 for pms, its connected to 3rd party pms software, when they do the check in the number gets displayed and when they check out it clears the name. but the restriction doesnt work once it is checked out, i have done following programs, what i am missing? 0401>10>0...

Dear Friends some clarifications on 2000IPS side when its connected with 2400IPS with CCIS link 1.Internal Missed call on 2000ips from 2400? 2.boss and secretary 3.call forward from 2000ips to 2400 4.ucd or hunting group? Thanks and regards

IS IT POSSIBLE TO CONNECT SV8100 WITH NORTEL PBX? HAVE ONE CLIENT WHO IS TRYING TO CONNECT WITH QSIG LINK. I HAVE DONE PROGRAM 10-03-01 = 1 (T POINT) 81-06-01 (DEFAULT VALUE) I AM ABLE TO ACCESS THE TRUNK, BUT NO DIAL TONE, AFTER SOME TIME IT GIVES DISCONNECT TONE. FROM...

Dear All, I Have one client who has Neax 2000IPS, i have a quesition They have DID incoming call example:8943xxx, the pilot call comes to the Main attendant console, i want the destination of incoming call to ring in 2 more digital stations in addition to Attendant console. is it possible? if...

HI, Is it possible to get SMDR on station to staion call on 2000IPS? what programming?

Dear Frens, i have sv8300 systems connected Analog Trunk lines with caller ID as Incoming call. i get the incoming call with caller ID, but if incase i restart the system caller id will not for may be 10 to 15 minutes, is this problem normal?or i am missing any parameter? Thanks in Advance.

Dear Friends, is it possible to make neax 2000IPS as 2nd or 3rd unit for SV 8300, as i have 8300 system with the 2 units, and i have connected 2000IPS via CCIS overIP, but there are some issues with this, so want to know weather i can connect neax 2000ips as 3rd Unit for SV8300? Thanks n regards,