Search results for query: *

Hi all, I have one of BES 110 when i tried to run it, it gives me this massage : Booting... Testing main memory - PASSED Starting.. Business Ethernet Switch BES110-24T Boot Version 1.0.0.4 Wed Jan 17 15:13:18 2007 Hardware Rev: 03 Resets: 4 Initializing Flash.. Reading MAC...

Hi all, i have this odd problem, i have multiple sale-points connected to the same switch 1 is working and the other 2 does not when i connected these 2 directly to the core they worked!!!, but in the edge switch they did not,although the 3 sale-point have the same port configuration and work...

Hi all, i used to use ERS 2500 switches with licensing stack to make a stack of 2500 switches, and that work fine. but i get some new switches from nortel with stack factory enabled feature, when i log in to the switch and try to change the mode of rare ports to stack mode, it return to stand...

Hi all, I was configuring the ADAC option for some site, i have ERS 2500 V4.2 on the edge, and 8300 on the core, I do the configuration as the following: Operation Mode? UntaggedFrameAdvance , voice vlan (70 which is the IP Phone Vlan), the uplink port is the trunk port from the edge to core...

Hi all, i know this section is for Nortel but Trapeze MX-200R is exactly like Nortel WSS 2382,so my question is how i can make hidden SSID that does not appear on radio scanning? thanks.

Hi all, i have both the latest ESM v6.2 and the JDM v6.16 the ESM came with its own JDM which is v6.09, i want the ESM to lunch JDM i installed which is v.6.61 because of the new image of the ERS 2500 v4.2, My question is how to do so, if there is any one tried to do this? please any help...

Hi all, I have a WSS 2380 want to update it for the recent SW image, my question is does the images for the 2382 compatible with the older HW 2380? and what is the recent SW version ?, i search at the nortel web site and only found one file NT804114.rel is it the right file ?,I do not find any...

Hi all, i have a 2 questions, What is the right CLI command to perform fast start-up for ports in the 2500 switch?, i tried the one used in both 470 and the 5500 it give invalid value please need your help if any one know the right command because doing that for a 50 switch using JDM is a night...

Hi all, i 2x8300 at the core and stack of 4 5510 on the edges when t connect a lap top with a static ip to one of the edges it works fine, but when remove it and connect it to other edge it does not work and i can't ping it, i check the ARP table in the first edge i still see it there. a delete...

Hi All, i have a wss 2382 v.6046 controller want to used it to give wireless for the internet purpose, i have a flat network and i dhcp server for the default vlan, but i need to give the user a different ips than the dhcp give, i use the dhcp from the controller, i have only one AP 2330A for...

Hi all, i have a BCM 50 for my office i just log in it using element manger just to have a look, the element manger forced me to change the default password. i know tried to log it again but it seems the password is wrong, i forget the password and i need to log in the system again. is there...

Hi all, i have a weird situation, i start a sniff process in my lan and i can see the comuinication between the 2 server in my lan (unicast traffic ) not the broadcast only, it seems that the 8300 act as a hub!!!!!!!!!!!!!. why is that happen ? is there any thing enabled should disable it (like...

Hi all, i have 2 different vlan (without ips)and i am trying to put a server link as member in each vlan. i do the perform tagging option, but can not ping the server from vlan1 if the sever link default_vlanid=2. if i change it to the 1 it works put the other vlan face the problem. so i can't...

hi all, i have a network consist of 2Xcores 8300 and four access stacks each of 4xERS5520, want to create a vlan for each stack the work station in the vlan can see only its neighbor and the server vlan only, i do not need full routing between the vlans. can i do this without creating traffic...

Hi all, i have an accelar 1200 trying to maneget it, but when i turn on it seems it does not boot correctly. give this in the hyper terminal session: Accelar Monitor v2.0.5 CPU: 60Mhz PPC 403GCX Type 2 Rev 1 in Slot 5 DRAM: 32M Chassis: 1200 Reason for Last Reset: WDT Power supply 2 not...

hi all, i have a ES 2500 switch, i made 2 vlans on it plus the default one. i made one port member to all the vlans, then connect my linksys wireless router (also dhcp enabled) to that port,when i connect my PC to the switch in one of the 2 vlans it does not take an ip. also can not go internet...

Hi all, i have a small branch i need to connect it to head office, through the ADSL, which scenario is the best and the cheapest to do this, is it to buy a VPN from ISP directly? or i must purchase any Nortel products to do this best regards.

Hi All, I have this problem. I have 2 Nortel 420 stacks connected to a 3510 switch and the 3510 switch connected to an hp core switches, I create 1 vlan on the edge switches with id no.10 And create the trunk up link which is member in vlan 1(default vlan) and vlan 10, when a put my laptop on a...

hi all, i have about 10 ES2500 that will take the same identical configurations, i want to configure 1 switch and copy the configuration file to other, how i can do this ?, is there a way to retrieve the file to a TFTP server ?