Search results for query: *

Have new Dell Studio 17 with Vista Home premium. I can read both SD card and usb flashdrive but when I remove them, even with "safely remove" the laptop reboots, asking me to restart in Safe Mode or normal. Any ideas?

Is it possible to use a web-based e-mail package rather than Outlook to send the voice mail messages and alerts from the IPOffice ?

Does anyone know if "Call Screening" using VMPro intuity mode is available or a way to set it up. I've discovered Whisper Page and not what users want. IP0500 V4.2.22 Caller goes to VM and user can hear message and pick up call. As always, thanks for your help.

Location wants to use Conf500 for 3 different groups using different short codes to access. If Conf500 already in use by one group, wants others to get busy when dial short code or pin number to access. Any ideas on how to accomplish this? Thanks in advance for you help.

IP500. Has anyone seen VCM work for awhile and then fail? or be the cause of no speech path when call connected?

406v2, 4.2.4 - VMPro(intuity)4.2.24. Up-graded few weeks ago using correct procedure. Have had no problems. All of a sudden, new messages are being deleted. Users see Message Light on. After a couple of hours the light goes off and messages are gone. Happens to all users except 1 group mailbox...

IP 500 4.2.4. Have checked all short codes I know. when dial 9,911 display shows external 911. Hear dialtone and then fast busy. Any help is appreciated.

We have an R7 installed with 5 lines. 3 lines appear(immR) on all exts. 2 lines appear(immR) on 2 exts only. Intermittently ext 11 will have an outside call ring on intercom, she answers and talks to caller. We have verified the call has not been transferred but have not yet verified what number...

Since we up-graded IP500 to 4.2.4, everytime we reboot, the 5410 and 5420 V2 phones download firmware. Any ideas?

IP 500 R4, need analog and digital station to ring when digital ext dialed. The analog port has a ringer device and the ringer works. I don't want to use hunt group, calls to the digital extension should ring at digital phone, ringer device and go to voicemail if no answer. I have tried...

2 - 406v2 SW3.2.61 SCN Has anyone experienced SCN communication causing a Cisco Pix 525 to flash dump memory and reboot. When a user at site 1 calls a user at site 2 the call times out, the user receives a busy tone and then the Pix drops the VPN connection and reboots. Any thoughts? Routing...

Yesterday we changed ISP at 1 site of a 3 site SCN, network administrator changed firewall to new public ip address and verified VPN connectivity between sites; all other aspects of WAN apparently functioning. Other 2 sites could call new ISP site but when try to call other sites the screen...

Site A - 406v2 3.2.61 vcm vmpro extn's 3000 range line 50 with ip address of site B's ipoffice Site B - 406v2 3.2.61 vcm vmpro extn's 4000 range line 50 with ip address of site A's IP Office, outgoing group 50 SC 3xxx dial 3xxx line 50 Can successfully ping each ip office from the vmpro pc at...

Can anyone tell me if IPO 4.1.12 is correct version for VMPRO 4.1.40?

Up-graded 406 to 4.1.2- VMPro to 4.1.40 and Conf Meet Me stopped working. When you call from outside, seems like you are answered, but nothing happens. From inside caller sees Conference 100 on phone, but no beeps or indication connected otherwise. Worked fine before up grade. Any body had this...

Can anybody tell me if VoiceMail Pro will continue to run at location A once I remove the dongle to install at location B? If so, for how long?

I have one office with 8 port VMPro- only needs 4 (VMPro-3.2.36,IP406v2-3.2.61). Another office with 4 -needs 8 (VMPro-3.2.30,IP406v2-3.2.55). Has anyone tried to swap a license dongle before?

I'm changing from a 406V2 to a 500. Have embedded voicemail PCS 01. Can I reuse in the 500?

I have 406V2 configured w/8D,2A,4-line card, 1-16D stat module. Need to replace with 500. I know how to get to latest release and equip I'll need, but I don't know what will happen to the configuration. Does anybody know if I will be able to simply load the existing 406 configuration into the 500?

Another new one for me. VMPro 4.1.40, Intuity mode- user cannot forward voice message. When press 1 during or after listening to mesg, nothing happens. Works fine on 4.1.27. Anybody know?