Search results for query: *

I have an 3641 IP Wireless Handset. It is currently showing: Error RADIO/RADIOMGMT.C LINE 013333 0000000 0000000 I cannot locate this error meaning on any AVAYA site or Cisco (AP) I am trying to determine if this specific to the handset or the Radio at the AP. Please advise. Thanks, Phonemanrwj

One of my IP handset was receiving a radio.radiomgt error today. I tried to google this error and looked on the support.AYAYA.com web site but could not locate any info on it. Is this an internal operational error (like flash config), or a firmware/battery issue? I reboot the phone and the...

I have 2 new users - 6739 and 6740 I added them in modular messaging After the users personalized the mailboxes I added the cov path (500=4r->h99) what is happening though is when either of these extensions are dialed, after the 4th ring when the MM answers it is as though whomever is dialing...

In CMS Supervisor r13 I am currently printing daily VDN Report Interval. I know there is a way to set a script up to schedule this to be printed automatically. Only I can't recall the correct code to enter. Any help would be appreciated

My Veramark e-CAS is sending out a system alert that it is within 5% of its model size. I have cleared out part of the archive files but continue to receive these alerts. Has anyone else experienced this issue and of a known fix? Thanks, Phonemanrwj

I have an AVAYA 9640 IP phone set I am trying to test in my PBX. I upgraded the 46xxsettings file and added the appropriate 96xxupgrade file to my HTTP server. The phone loads all the firmware settings and receives an IP address from my DHCP server. When it arrives at the discovering window...

Using a TN2198 U type interface what pinout do I use off the 25 pair cable to get my port. Are the ports supposed to be Data Mod WCBRI or Station WCBRI? will I need a separate anaolog line for voice or will it work with just the BRI

I have programmed the TN2198 in my CM 3.0 8710 switch. I gave each BRI extension a SPID #, since we are looking to use this for video conferencing. Currently I have set up 4 ports with 2 end points on each port. When I test the board it fails test 621 with an error code 1. Each port is failing...

Where can I get the 96xx settings file from. Everything I have read tells me it is included with each phone. Unfortunately it is not pre-loaded on the phone sets and I have not received any cd's with the phones. If anyone knows it would be greatly appreciated.

This question is reguarding a Modular Messaging 3.1 system on a Definity 8710 C.M. 3.0 - Is there a way to set up mailboxes to to notify a pager when messages are left through the MM?

I have 50 of the Netlink 8020 handsets operating on my Definity S8710 CM3 PBX. I continue to receive reports that the phones are receiveing authentication and loss of connectivity to the AVPP errors. The Phones then automatically powercycle. Is this a common trouble, what is the root cause...

On a 3631 IP Handset- I have bridged 2 call appearances of another extension and they will not ring. I have selected as yes both - allow bridged call alerting per button ring control Any ideas of which steps or features I might be missing would be greatly appreciated. Thanks, Phonemanrwj

Transfer calls do not go through at times, is this timing or a load balance issues? I've added call classifiers to each cabinet which did not seem to adjust the issue. Some scenarios: - press transfer, dial the extension then press transfer and the transfer will not complete. - press transfer...

Having issues with administering this type handset in my PBX. Ive loaded the 46xx settings to the phone. The powers on and configures correctly then allows me to log-in. All extension and features programmed to the extension populate the screen. Afterwich, I can place one call into the phone or...

In a Definity 8710 PBX, I recently configured a PRI/ISDN using QSIG to interconnect to a Nortel Option 81c. It was working once we changed the digit handling to overlap/overlap on each end of the trunk. Once the trunk group was turned up though it seemed that we started having timing issues...