Search results for query: *

Hi, I have the following table and want to look for a phone extension in column Poste_Autorise but only return a true value if something is found. I did this query that does not work because in my app if there's an empty value between the %% it does return 1 anyway. I want the LIKE statement...

Hi, I'm trying to make the star key work with LCR and IVS2000, and for some reason it's not working. I did a lot of LCR with other digits with the same setup and it is working fine. Is there anything special about the star key with LCR? Here is part of my programming that is not working...

We have some problems with our IPS and call forwarding. We cannot do any CFA system wide. I can do it with MOC, but none of the users can do it with the access code neither with a programmed button on a Dterm. Analog phones are not working either. All we get is a RESTRICT 6 seconds after...

I have a IPS with 911 not working anymore. It all happens since we removed route 14 which was connected to a PRI from our system or maybe something I Did in LCR. I only modified LCR group 3 for internal calls and 911 is in LCR group 0. Here's what I got from MOC: 8A4005>911:WRONG- 855>911:03-...

We have an IPS 2000 and I keep losing more and more call forwardings set with command E600. I know for sure that I have saved with EC6. I know our system is old since it's an IVS converted to a IPS but It's really annoying and it's getting worse day after day. I also have problems with ISDN...

Hi, We have a IPS with 8 PIM., I'm in deep trouble with all my isdn link. All of a sudden I got the RMT LED on (Frame Alignment signal loss alarm). It all started with one isdn link connected to my other pbx(PN-24DTA-A), and then my second isdn link(PN-DTA) connected to our PRI. And now after...

I'm trying to remove a route pattern in our IPS. 8A4007>38:0020-CCC OK However, I cannot dial the number, I get a restrict right away. Extension starting with 38 were previously sent to another PBX. I am currently transferring the extensions in our main PBX. Am I missing something?? Do I have...

Hi, we have a IPS 2000. I would like to forward all calls made to the operator to another station but it is not working. The operator is using a SN-716. Here is what I have tried in MOC: E600>E000 DATA ERROR Is this something I can do?

I cannot get caller ID number to show on our main PBX.All I get is DDD. We have the following setup: PBX(Asterisk) ---(ISDN route 17)---> IPS 2000 #1 ----8IPLA(route 20)-----> IPS 2000 #2 IPS 2000 #1 can receive both calling name and extension number. IPS 2000 #2 only receive calling name...

Hi, We have an Asterisk system linked to our NEC IPS by ISDN. Everything is working fine except outside caller ID. Outside caller ID is not transferred to our ISDN gateway. All I get is the voicemail port number transfering the call. I have no clue of what could be the problem... Click on this...

Hi, We want to link an Asterisk to our NEC IPS (version 3900). We found a SIP to ISDN gateway (Mediatrix 3532). I need to add a PRI card but I'm not sure which one and where I can install it. There are many versions and I can only find used PN-24DTA. Here are my options so far: Option 1: 1x...

Hi, We want to link our IPS 2000 (Firmware SC-3713) to an Asterisk system with SIP trunks. We need to add a PN-8IPTA and PZ-24IPLA to get 32 SIP trunks. If I check our enabled features and license I get this: F87>170 170:VoWLAN(SIP) :A F88>22 22:VoWLAN(SIP) :0000 Does command F88>22...

Is there any command better than the CCC command? We have a stubborn virtual line that will not respond to my command because it is busy, but it is not.No one is on the line. 11>0001:2051-CCC WAIT, BUSY NOW My only other option is a system reset.

Hi, I have a IPS 2000 and I'm all confused about the timer setting. The IPS is connected to an AD-64. I want my internal call to ring 4 times and go to VM. So I set the timer like this: 410>15:03 The problem is when it's an external call that the AD-64 forwards it only rings 2 times (about 12...

Hi, We have 2 IPS and 1 IVS. I'm about to move an IPS to a new location with a different IP address. IP address of IPS#1 is 10.150.64.x. IP address of IPS#2 (the one I'm moving) is 10.150.32.X. I have to change the Lan interface and the IP-PAD adress of our IPS#2 to 10.150.64.x. I know where...

I'm doing an application that minimizes to the system tray on closing or minimizing.For some reason the application do not respond to keyboard event when it's minimized or closed to the system tray.It's working fine as long as the main window is visible. Basically it's a VB application...

I'm doing an application that minimizes to the system tray on closing or minimizing.For some reason the application do not respond to keyboard event when it's minimized or closed to the system tray.It's working fine as long as the main window is visible. Basically it's a VB application...

We have an IPS 2000 and would like to know if there is a command to turn on caller ID when a sub line is ringing. We always see the caller ID after we answer the call. I'd like to be able to see who's calling on the sub line before I pick up the phone. Our calling ID work fine on prime line.

Hi, We have a Smartphone system in one of our elevator. It is connected to a IPS 2000. The Smartphone will only detect a hang up, if it receives a wink signal or a cpc signal. Is there a way to program the IPS so that it sends the CPC or wink signal after the user hangs up? I was gonna try...

Can a NEC DTH-16D-2 IP phone work with an IPS system?