Search results for query: *

i apologise in advance as new to telecomms stuff. is it possible to list all users or stations that have console permissions allocated/enabled. checking our setup i see cos 12 has this enabled but i want to see who has ability to record announcements.

Hi, I'm using a network management product that allows you to run a script or batch file on receipt of snmp traps. Anyone out there suggest an snmp trap (oid) that can be used to instigate my backup script when my router's config has been changed ? Using NetCrunch NMS and Cisco Routers. Thanks.

Anyone out there know what the mib/oid identifier would be to monitor the 'reliability 255/255' reading on a cisco router or switch interface ? Thanks...

I have a couple of 12-port fibre Cisco WS-C3750G-12S-E switches which have Catalyst 3550 clusters patched into them. Each 3550 Cluster has been allocated a seperate Vlan. I have physically moved 6 x PCs, which use DHCP to obtain their IP addresses, from one cluster (vlan 10) to another cluster...

I have a WS-X6748-GE-TX module in slot 1 on a 6509. Slots 5 and 6 have Sup720's. All ports on this card except port 1 work in slot 1. All ports including port 1 work when card inserted in slot 2. Have swapped the 48-port card out with new/spare but still experiencing same symptoms. Have even...

I have a Cisco core (dual 3750 switches) which have user vlans configured. Lets say VLAN 10 and VLAN 20 I have a number of Nortel BayStack 450-24T switches (access switches)which are to be used by client PCs. How do I configure the Baystack ports to become members of the correct VLAN. Where...

I have a Cisco core (dual 3750 switches) which have user vlans configured. Lets say VLAN 10 and VLAN 20 I have a number of Nortel BayStack 450-24T switches (access switches)which are to be used by client PCs. How do I configure the Baystack ports to become members of the correct VLAN. Where...

Anyone shed light on the following error seen when a 3550-24pwr boots up ? POST: CPU Buffer Tests : Begin POST: CPU Buffer Tests : End, Status Passed POST: CPU Interface Tests : Begin Non-free molecules were seen on the notify ring. POST: CPU Interface Tests : End, Status Failed It was...

Is there a problem with Intel EtherExpress PRO NICs and Autonegotiation settings using Cisco switches in general ? I have 2 x Dell PowerEdge 6300's being used as Citrix servers. If I set the NICs to Auto and likewise the same on the Cat 3750 core switch users report very slow response, likewise...

I have created 4 ports on a 4006 and a 2970. Does PAgP have to be configured ? Is it essential ? What benefit does it give ?

I am configuring 4 ports on a Catalyst 4003 as an Etherchannel to a Catalyst 2970. Can you confirm whether Portfast has to be disabled on these 4 ports ? What would be the effect if not disabled, loops ?

Any stencils for D-Link switches out there ?

Has anyone had experience with upgrading Supervisor II to Supervisor III modules on a 4006 switch. The 4006 currently in use with the Sup II is showing 45% use (show proc). Is it just a case of saving config file to a tftp server and then copying it back to the new Sup III ? Do I have to...

Has anyone out there used the Citrix DOS-Client on any of the Dell OpliPlex GX PCs ? I've tried and succeeded in configuring the GXa and GX1 models but from the NT logon box through to using applications (e.g. IE5) the video effect is very 'grainy'. Anyone got a resolution to improve ? Dell's...

Trying to find topology.cnf as described in earlier threads but directory structure does not exist. Am using NMS 9.2 on W2k. Have found a shortcut file called topology which is of type 'SpeedDial' but no '.cnf' This directory is \optivity\nms\apps\topology I too cannot get autotopology to...

I currently have 2 x Cisco 4500 Routers connected to the same Catalyst 4006 switch. We are considering enabling HSRP on the Routers for resilience. Is there anything that needs to be configured on the two switch ports to ensure this works correctly ? The Routers have 10MB/Half Duplex Ethernet...

Since putting in a new Cisco 4006 switch I have had problems with a Router which appears to hang and only comes back to life when powered off/on. The Router is a 4500 with IOS 11.2 The switch is running 6.2(1) On the local subnet I get no response when pinging the default gateway/ethernet...

I have created a published application which accesses an intranet page via Internet Explorer in Explicit mode. Users already log on when powering up their machines and I don't particulary want them to have to sign on again to access this intranet page. I have tried setting up in Anonymous mode...

Hi, Can any of you gurus tell me what the ultimate settings for the APPSRV.INI file would be for low bandwidth use and quick connectivity ? I'm talking DOS Clients. Cheers!

I have 2 Routers on the same network. I PING a server the other side of the WAN from my PC and get the desired response. When Router 1 is powered off, no ip traffic can access the WAN via Router 2. My PING session advises 'Response Timed Out'. When Router 1 is powered on the WAN is accessible...