Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: ElmerWFudd
  • Content: Threads
  • Order by date
  1. ElmerWFudd

    HP DL380, DL360 PCI cards

    Stupid question maybe, but, the PCI slots in my DL380 and 360's G1-3 do not have the same pin form factor as any of my desktop PCI cards. I was going to install a Swann DVR card, but NOOO . . . So what does work in these slots?
  2. ElmerWFudd

    DL360 G2 CD drives wont eject

    I thought it was the drive, but I bought another on eBay and both: when I push the eject button on the tray door they click four times and do not open. Compaq Part No314933-637. I have tried using the eject command in the "my computer" connected drives (CD is recognized as present and says...
  3. ElmerWFudd

    DL380 G2 bad SCSI slot 1

    My DL380 G2 indicates that any drive I place in that slot has failed. But those same failed drives work before and after on a different machine. I believe Slot 1 is defective. Some manual said to always fill the slots in order. I think I would be best off disabling the bad slot. Can that be...
  4. ElmerWFudd

    DL360 Linux Wavy right side of screen

    I succcessfully installed Linux on a DL360 (gen 1, pre-gen 2). Everything worked well and smoothly except that I have wavy lines distortion on the right side of the screen. I had the same issue 7-8 months ago on a DL380, and this post ended the discussion: "Wavy right side of screen magnatec...
  5. ElmerWFudd

    screws for hotswap drives

    I have drive trays, and I have drives. They came with just a couple screws, but need 4 each. These are the black drives with the maroon button on the left to unlatch and then pull the lever to remove. CPQ/HP used these in 9, 18, 36, 72 Gig drives. Where do I get the screws?
  6. ElmerWFudd

    DL360 Need to remove cover

    I got a DL360 G0, dual 800 mhz., delivered today. I hooked it up and powered it on. No display. I checked he eBay item descrription and it was shipped with no RAM or drives. OK, I have those. But I cannot get the cover to come off. The sticker seems to indicate press then release the...
  7. ElmerWFudd

    DL380 Linux Wavy right side of screen

    I have 2 DL380's: a Gen 1 and Gen 2. Linux is installed on both. Display is fine for G2. Compaq Proliant banner and POST display OK on G1, but when the Linux desktop loads, the left 1/3 of screen is OK but the right 2/3 is a wavy transposed image that is not readable. 2 different monitor give...
  8. ElmerWFudd

    Proliant DL380 G2

    Can anyone post a link to the support manual for Proliant DL380 G2? Although the different link below works for ML370 I could not shorten the URL to get to a menu. http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_143091-004/TPM_143091-004.pdf I just unpacked a G2 and would...
  9. ElmerWFudd

    CPQ DL350 G1 initialization

    I bought a Compaq DL380 G1 server and blank drives. When I power on, after 5 seconds I get a Compaq Proliant banner, then RAM check OK, processors check OK, Smart array drive configuration, and then: non-system or disk error. I have the latest smart Start CD in the drive. I also tried it empy...

Part and Inventory Search

Back
Top