Search results for query: *

I some help with the fitness room phone being a ring down phone to the attendant when it is picked up. I have not worked on a mitel this old! They will be replacing the system this year but this is needed for the hotel to pass inspection. Some guidance would be much appreciated. Thanks in advance!

Currently IP Office 500 running 8.1.69 and trying to convert from regular t1 to pri and running into issues with Windstream rejecting the call. Pri is setup for NI2, I have set up the "no user" source number to NI2_CALLED_PARTY_TYPE=UNKNOWN and we are having no luck, played with the NSI and...

I have a customer with a Mitel 3000 that has bought a message on hold device and a=wants it connected to the system, with the connector they sent which is a LR5950 .06200 . I have plugged this into a digital port and programmed this port for external music, however no music is being heard over...

I have a defenity system with a aux port into a bogen multicom 2000 that works but is very low volume. Has anyone experienced this? It is setup using a aux port into the relay card of the multicom. Any help would be great. Thanks in advance.

I have 4 ip offices linked together using scn, currently they are all 8.1.43, all have the scn running for about 5 days now what the issue is that they cannot dial any of the extensions at those other sites. each unit has the trunk from each of the ip500v2 as well as the ip address of the 500v2...

I have been given the task on this BCM 50 of changing the ring of the 4 lines from 2 sets to 3 sets, I am not up to speed on the Nortel BCM 50 as I would like, is there something fairly easy with it? Any help would be great, I have changed the names, reprogrammed the buttons , etc, but it is a...

Bear with me I have inherited a bcm 50 and know a little on the nortel, I am trying to change the ringing on the 4 lines so that it rings a 3rd station, currently it rings only to sets and I need to change this to three. Any help would be appreciated. Thanks

Wandering if this has happened to anyone with ip office and nortel phones, what has happened twice is the the on a incoming call the console phone will just ring continously until you unplug the set, this has happened twice. Of course its when I am not around and no one else can really tell me...

It looks like I have a Hipath phone system with in the skin vmail, we need to set up auto attnd, currently it just has a recording in place. How hard is this to setup and activate? I have some experience in voicemails.

I have a 500 v2 with vm pro running the intuity mode, currently they have the main number going into hunt group, at nights this sends it to the auto attnd and it perfect, but during the day when the recep have to step away from her desk the system doesn't send it to the auto attendant, it just...

Wandering if anyone has a good way of doing this, I have the main number coming into hunt group then to one user in the hunt group. When she has to step away for any reason I want the calls to be routed as they are at night. Which goes into auto attnd and then gives caller option, etc. Is there...

Here is what I have, Legend r7 with roughly 30 phones tied through a point to point t1 to a definity, I have set up the non udp routing table, if they call a extension 1001 it routes to the correct area the help desk(hunt group), but if they call anyother extension 2xxx,4xxx,7xxx, etc, the call...

Hopefully someone can point me in a direction to look at, currently I have a defininty tied to a legend rel 7 via a point to point t1, there is roughly 30 phones off the legend using udp, I have set up the legend for non udp routing. What is happening on the definity, is that no matter if you...

I have a ip office 500v2 - all ip, the main answer position has a 1616 with 2 - 32 button module on so she can see who is on the phones, etc,etc. The issue we are having, is that the activity light don't seem to match up when people are on the phone, dnd, activiated,etc. the buttons are...

I have a 5610 that seems to need some files, I have the files on my laptop and set the tftp ip to my laptop but the set just says please wait. I look in the tftp log and see that the message states unable to send. what is am I missing.

Can anyone tell me how to set date and time in voicemail, it is a old startalk (big box). Any help would be great!

I am being thrown in on installing another console on the Nortel c1000. I have never installed a 2250 before let alone worked on a c1000. Is this something I should run from or is it fairly easy? Thnaks for your help in advance!

I am trying to program loudspeaker paging on some phones, I have the button programmed, but thry still need to dial a 0 to get to all page.. is there anyway to program the 0 as well. Any help would be great! thanks

Has anyone had anyluck with ip offices in singapore. we will putting a office in singapore and want to see if the ip office works well in singapore? Any help would be appreciated.

We have changed the ip addresses in the 8700 and for clan's, medproo's ,etc. We can not ping the 3 ip addresses for the servers, we did power down the servers and this did not fix the problem, we are in the process of getting the dadmin access and linux acces from the BP. Any advice on this...