Search results for query: *

Hi to all, I have an Hipath 3000 (V8) and I need to use LCR for a specific case. The PBX is connected to analog antenna for a ship use). I need to dial 11 before digits I need to dial # at the end of the digits. Manual way is to dial : 01 (prefix access) 11 (prefix needed on antenna) XXXX...

Hi, Has someone already used a 8002 with mitel. I tried to use version 130.009 and set displays bad phintl file when starting. I have downloaded one more time the firmware but problem is the same (on two different site with Mxe). Rds Now, it's about French users too !!!

Hi to all. I use a 3300 Mxe with version 8.0 UR4. Sets A and B are spectralink i640. A is 1st alt. forward to B When C calls A, name is presented. When calls is forwarded to B, display shows "From A". Is there a way to display C (name or number or both)... I haven't found anything in COS...

Hotline is only straight and doesn't afford possibility to let the user dial any number. We could imagine the need to be able to dial a number, and if nothing is done to be directed to a programmed number... Here is the way to do so (wihtout using hotline) :enjoy In the device's COS, set the...

Hi, My plateform is: 3300 Cxi Since I upgrad to 4.0 SP3 (I want to keep OPS), phones reboot from time to time. Never reboots when calls are engaged, seems to be when screensaver is displyed (I use the default one). It happens with phones connected to the Cxi and phones connected to HP POE...

I have recently upgraded ICP Cxi to MCD 4.0. I have a new issue. Some 5340 (not all) resets from time to time. Some are powered trhu ICP L2 switch, but some from Poe HP switch. Logs showed me port down error, lost heartbeat server, but nothing really explicit... Has someone already...

I have a 5310 conference module, attached to a 5340 IP sets. Conference unit is accessible using superkey and conference menu. I would like to know if it is opssible to programm a key to access directly to this menu ? Regards Now, it's about French users too !!!

Hi, I use Mxe 4.0 SP1 with polycom/spectralink 8020 handsets. Handset version: 131.024 SVP 17x.035 An issue occurs on supervised transfer transfer; Communication is engaged between including one wifi handset User presses FCN and transfer User diales number and press GREEN; The call is not...

I run a Mxe V10 and I use Html toolkit (with licences of course) to upload GUI's (5340). The first spx file I have uploaded was ok, but now, even if I upload a new spx file, it is not shown int the device tab. I have removed the old one but still presented in device form... Has anyone use GUI ...

Is it possible to trunk two 3300 ICP with SIP trunk ? How ? Now, it's about French users too !!!

Hi, 3300 Mxe; MCD 4 (10.0.0.10_2) First phone is a SIP phone (Ferntel) Second phone is minet (5340). The sip phone is registered and can be called from the 5340. The issue is about the sip phone which can't call ! (error while dialing on sip screen) First I looked for a dialing plan in the...

Hi, I'm running ubuntu 9.04 on my D510 Dell laptop. I have only one network interface. Network connection shows only eth0, bu interfaces listed in netqork tools show eth0 and eth1. When I connecte the laptop to the network, it seems that traffic is on eth1 and not eth0. The problem is, I...

Hi, Using 3300 Cxi, I have two analog lines (#10 and 11) on AMB. I would like to supervise those two lines from an IP set so when one is engaged, I could see it from the IP set. BLF is normally used to supervise telephones, but is there a way to do the same for analog lines ? Regards Now...

Is it possible to install a msde database instead of msql server ? YA 5.0 (before upgrading to UC) Now, it's about French users too !!!

I have connected LS trunks to GSM passarelle (Ericsson G36). I'm experiencing bad quality audio when calling thru mitel phones. I think it could be impedance difference between MITEL and GSM interface. Do you know parameters to change on ICP ? ICP 3300 Mxe 9.0 UR2 Now, it's about French users...

Hi, On my ICP 3300, default administrator password is not working. It is impossible to change it thru ESM; Is there a workaround ? Now, it's about French users too !!!

Hi, Click to call function works like this : * 5212,5224,may use MiTSP (only under Windows XP) * 5212, 5224,5312, 5324 may use U.C Express and U.C advanced (XP and Vista) Does anyone know a solution to use a free click to call from Vista for all kind of sets ? Best regards Now, it's about...

Hi ICP 3300 Cxi 9.0 UR2 Key on device A is programmed with DSS/BLF for device B When B is called, DSS/BLF key on A flashes When B is in line, DSS/BLF key is lighted When B has forwarded a call, DSS/BLF key is fast flashing. Is it possible to disable last conditions but not the 2 first one ...

I have an Entreprise Manager set up with Distribution list. My sites are not clustered. I would like to set up a cluster on order for users to be able to use BLF between sites and route calls from each sites using IP; My IP tunks are not sized to make calls, Do I have utility to migrate to a...

Yeah I know, it doesn't exist...yet This phone could be a great entry level one but..you know If you think as many people do about the need ti have it minet, please raise up a DCR... The more we are, the more it could happen We can dot it ;-) Now, it's about French users too !!!