Search results for query: *

hi, anybody knows a problem with park a call on mxone with the h323 telephones. i have probed with SIP terminals and all works fine. Thanks for all any ideas ??

Hi, i have a problem with this version of mxone and IP telephones dbc 42x02 series, i have configure one key with ODN2 (second line) , when i have a call i can take the second call ,the call is successful. The problem is that when I try to take the first call I had, the call is cut. any ideas??

HI, i have a customer in TSW SP5 . i have a question about the monitored keys on DTS extension. i have a DTS extension with MDN keys, i have program the CALALT =2 for one monitored keys for ringing after delay, all works fine,but the problem is that i want to reduce the time of ringing after...

Hi, I have a problem with repair the Lim 1, I do all the procces but the result is not OK. 1-I install the telephony system in the lim 1 (without ICT), i connect to lim 1 and transfer the safety backup to /usr/backup. 2- unzip the file 3-go to the root partition as root user 4- tar -x...

Hi I have a problem with IP Networking in one customer with the calls, The problem is that the calls are silent between both sides only sometimes. the configuration of the system is : In both side we have install ELU 32 board with 8 trunk. the configuration of the route is : <ROCAP:ROU=70...

Hi, we have a TSW and a MX-ONE linked by IP Networking. But we have a problem when try to do a call back, it does not work. The configuration on both sides: /*MXONE*/ ====== MX-ONE Telephony System ====== Version: 3.2 SP2 build7 MDSH> roddp:dest=all...

Hello, We have one problem in one of our customer in BC10. When we remove a number from EX table (nanse:numtyp=ex,numse=xxxx) inmediately if they try to call to some extension the phone shows "destination does not exist" we send a LADAI command and all is ok again. Anu body has the same problem...

Hi, I have a MX-ONE 3.2 SP1 with a TLU83. Anybody could help me with the configuration route for analog trunk and for FCT too? Thanks!!

Hi all, i am testing the V24 type callinfo output through serial port of ESU. I have programed it but I dont get any data in the hyperterminal...I programmed as follows: MDSH> callinfo_output_set -output 1 -lim 1 -type v24 -subtype asb501 -dbname /dev/ttyS0 -bitrate 9600 -stopbits 1 -parity no...

Hi, I have a problem with VSU in BC9. anybody knows how can i solve this problem? <radnp:vsid=all; WAIT WAIT WAIT COMMAND LOST I have restart the program unit RA1DP in all the lims and RHH in lim 1, but the result is the same. with command HIMDP appear the RHH progam in lim 1 any...

Somebody know how I can add a DRG22i to a Domain?. I have connected the DRG22i to TSW SP3, I have updated the DRG22i, the version of this is "cxc_132_4888-R2A21". Thanks

Anybody know how i change the Authority class in Mx One ?? I need the command in Md 110 (IOCAC) Thanks in advance Best Regards

Hi, I have a problem in my lab with call loging and Mx One 3.1.Sp 3, then i have a Char to receive the call , but the problem is that the Char application takes the file to interpret the calls and the MX one is not be able to regenerate that file. I have program this is my system...

Hi, The next week I'm going to install a MX-ONE in Dominican Republic, and I never have programed a T1 route, Somebody can help me with parameters of a T1 route? ROCAI and RODAI In a MX-ONE 3.1 with TLU76/11 Thanks

Hi, How can i configure in Messaging 4.1 a Shared Mailbox for two or more extension? anybody can explain me this. Thanks Best Regards

hi, I am triying to configure the input alarms, I have all wiring, the ALU2 board to MDF and from MDF to Power one (J9, J8, J7, J6) as shown in Alex...and I programmed the input alarms with: alarm_input -set -domain 0 -severity 3 -port 5 -code 905 -text "port 5" -active open -board...

Hi, I have a customer in BC12 SP11 and i have a problem with digital telephones , because when digital extension receive a call do not see calling party number only see connected A number. only see the number when user pick up the call. any ideas thanks in advance

HI All; I have Ip telephone type dbc422 and i am trying to configure to do a confernece with the key 3,only i can do the conference with the key of the telephone how can solve this problem? Regards the config.txt is : ;[FunctionKeysDBC422] ;Conference=3 ;Transfer=2 ;Settings=5 ;FollowMe=...

Hi, I have a system with Mx-One 3.1 Sp 1 and Md 110 in BC 10, the problem is that the PRA is on the MD 110. The call goes through the MD and is received in one extension of the Mx one. The problem is that the number is received without 0 ahead of the numbers. the configuration is this: In MD...

Hi, I have a customer in BC 9 , and we have a problem with printout of the Group call pick up. I detected that the problem is one extension , this extension before is on a group of pick up 13, but now i can`t to print this group. i can´t to delete this extension. any ideas?? <SUSIP:DIR=11116...