Search results for query: *

Hello everyone! I have an issue that even Avaya can't seem to figure out. After the POODLE vulnerability in October showed up, we were forced to change our settings on our firewalls from aggressive mode to main mode. The Avayas use aggressive but can use certificates as a way around that. At...

I have run into a new problem. We have several users that work remotely and use a 4621 IP phone. They were all able to connect properly to our phone system and work without any issues. However, a new vulnerability came up when we did our monthly PCI scan. It is an issue which requires that we...

Hello everyone! I really need your help with my problem. I have two G3 systems that are causing me a headache. We are doing office to office dialing (5 digit dialing) from the US to the UK. The calls between the offices sometimes drop after about 20 seconds. At times, it will happen multiple...

Hello everyone! I am having issues between two offices. When dialing via extensions, the call drops after 20 minutes. One of the phone systems is in the US office, the other in the UK. I have tried dialing other offices from these locations such as Switzerland and South Africa and I do not...

I have a brand new force10 switch. I plugged it into the network and gave it a management IP address. I can reach anything witn our network. But I can't ping out to the internet? I know this is something very basic. But I am a phone guy and they keep throwing this network stuff at me.SH RUN is...

Hello all! Newbie network guy here. I seem to do the phones but always get called to do network stuff. So hear is an easy one for you. We have a class c network and have just run out of addresses. The company wants to move to a class A subnet. My thought is that I can change the IP on all...

I saw some cabling techs using some RJ-45 plugs with lights on them. They would place these on the patch panel and another tech would put a tester on the jack in the offices. The light would illuminate the connector that was placed on the patch panel. From that point, the techs could docuemnt...

I have run out of ports on my 3750G. I was given a cisco 2924 to cross connect. I have connected port 1/0/9 of the 3750 to int fa0/1 of the 2924 with a cross connect cable. I can't get the switches to see each other. 3750 interface GigabitEthernet1/0/9 switchport mode access duplex full...

Hello all. I am a final step away from getting this network up. The problem that I am having is with the inside interface of a firewall. At least I think that is the problem. I can go into the firewall and ping the inside interface without a problem. I can also ping out to the internet. But...

I am at a cross road.My remote users have the inter-tel 8662 ip phone and they have lost allof their licenses and are now off line. How do I fix that?

I am a phone guy who knows hardly anything about routers. The rpoblem is that I am now the data guy as well. I have a brand new 2851 and 2 dual wic's (vwic2-2mft-t1/e1) that are now installed into the router. I have the customer serial ip 12.x.x.178. the ATT router ip address is 12.x.x.177 and...

I am missing something on my PPPoE config. It should be static with PPPoE enabled. I still can't get a tunnel. Here is the config. Please let me know if you see anything left off. Thanks, Scott PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside...

I ham trying to point my PIX 515e to a new ACS server. When I do that, the users are not able to authenticate. Error 403. The PIX and the ACS server are communicating with each other. However, I did notice that the failed authentications (or anything for that matter) are not being written to...

I think I know the answer to this, but I always like to submit this information to the experts to point me in the right direction. I am putting Cisco ACS onto a new server. I will install ACS with a disk and then copy the current files from the old to the new. Are there any special steps that...

I have a 2003 excahnge server that is erroring out during mailbox backup. The error code is: a000fe2d HEX The error description is: The backup of the item is bad. I found some documentation stating that that a registry entry needed to be performed. I did this and the change did not help at all...

We have 2 domain controllers that were clustered together before I arrived at this company. Are there any proper steps to uncluster this equipment without the network having a ginat hiccup? From what I have been told (this is my first week here) When the clustering was done, problems were...

I have one user that continues to have his outlook go offline with no rhyme or reason. Outlook 2003 is being used. There are 70 people in the office and it is just happening to one person. Has anyone run into this problem before? Thanks, Scott