I upgraded my cable connection to 200mbps. I have an ASA5506x with a 3550 switch. When I connect a PC or laptop direct to an ASA port I get full 200mbps. But when I connect to one of the ports on the 3550 may speed gets reduced to only 100mbps. I tried changing the speed/duplex with no luck. Has...
I have set this up in a lab and it worked fine but can't seem to get it working in a production ASA. Only difference is that in the production ASA they are using ldap. He is my scrubbed config and the screen shot of the windows error.
Fernley-ASA(config)# sho run
: Saved
:
ASA Version 8.0(4)
...
I have configured failover using the management port. When I unplug the LAN interface the Primary goes into standby and the stanby unit goes into Primary state.
But when I plug the LAN interface on ASA1 back the Secondary stays as Active UNLESS I unplug the LAN interface o the Secondary unit. Is...
I have a WAN router with multiple WAN IP subnets. It connects to a L2 switch. Can I configure the ASA 5515x with one of the WAN IP's and still configure inbound traffic for one of the other WAN IP's assigned on the router?
I have a customer that has an IP PBX (Site A) with a remote site (Site B) with IP phones registering to Site A.
They have an MPLS network. I configured GRE tunnels on the Cisco routers for the Multicast traffic. The paging is working but the conferencing is partially working. When Site A tries...
I have a Cisco RV110W & an SF300-08. I have been trying to configure a trunk between the 2 and I'm starting to think that the RV110W cannot do it. I tired configuring port one and tagged and untagged & configure the ports on the switch to the specific vlan's I want but can't seem to pass both...
Can someone please explain the licensing for this feature? I want to be able to use the AnyConnect client on 25-30 PC's.
I'm using an ASA 5505 with SEC Plus. Thx
I have a customer that was using CallPilot UM Messaging and was forwarding the VM's to a local Exchange server.
They moved the server to a cloud based solution. We adjusted the Call Pilot settings but the VM's do not get forwarded. They have to use the DNS name of the cloud server because the IP...
I have an customer with an ASA5505 with VPN Client connections. They are stating that when the clients connect they can access the resources on the network but they cannot browse the network (see the actual devices).
Is this supported or is there some config that need to be added to the group...
I have configured some ACL's on a Cisco router. When I send pings between the endpoints I noticed that sometimes it states Destination Net Unreachable and sometimes Request timed Out.
Why is it not consistent?
I have a client that will have an ASA 5505 with a DMZ and inside network. It will also have 2 ISP connections.
They would like the DMZ to go out ISP 2 and the Inside to go out ISP 1. They would also like each to failover to the other ISP.
I know there can be multiple SLA Monitor sessions but...
I have a router that has 2 IP's on the fastethernet with different subnets. I need to change the interface to a subinterface . I don't see an option to create a secondary IP on the subinterface. Is there a way around this other than creating a subinterface for each subnet?
Currently the PC's are statically assigned IP and DNS. I want to test a feature but when PC's use DNS I need to redirect DNS requests so that they forward to another DNS server.
If an inside PC had 8.8.8.8 statically assigned for DNS, I want that PC's DNS queries to be redirected to use a...
I have (2) 5508 WLC's. One has about 145 AP's and the other about 160 AP's.
Initially the AP connects to the first controller using DNS. Afterwards I configure it to connect to the 2nd controller bu configuring the Primary Controller in the settings.
The controller names are: WLC1,WLC2
I...
I'm upgrading the RAM and flash on an ASA 5510. I will transferring the contents of the old flash to the new flash. I am going to do a copy flash and write to start-config (using a running-config backup that's on the flash card). Will the CA certificate and crypto keys also transfer over?
I am working on an ASA with dual ISP's. One primary and one backup. I configured IPSLA, tested and it works fine.
The customer has a VPN back to a Sonicwall using the primary ISP and is working fine. They want to use the Backup ISP for the VPN all the time while still using the Primary for...
I am setting up an ASA 5505 with multiple ISP connections for Failover. My question is related to the ISP DNS Servers.
I am using the ASA to hand out DHCP to the LAN. I know I can assign dns servers either globally or through the DHCP scope but it limits me to only 2 DNS Servers.
This is what I...
I used to be able to SSH into the ASA via the outside and failover interfaces but now I cannot.
I even tried allowing telnet from ANY to both interfaces and it won't work. I cleared the RSA keys and Re-generated but still no luck. Rebooted several times and still no luck.
I have suspect that the...
I have a Mitel 3300 MCD with a user that every so often loses audio on the phone.
I checked the logs and this is what it shows:
An IP Device registered at 4952, CDP L2 MAC address Not Supported, CDP L2 Port Not Supported, CDP L2 IP Address
The MCD is on a flat voice network. Most phones have a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.