Search results for query: *

I want to do the following: (relevant config first) ------------------------------------- router a: fastethernet 0/0 (local) ip address 192.168.0.1 255.255.255.0 ip nat inside fastethernet 0/1 (wan) ip address 213.1.1.2 255.255.255.192 ip nat outside interface Tunnel1 ip address...

lets say I have the following setup: This is a Cisco 1811 router with 2 FastEthernet router ports and a 8-port switch (layer2) I want the following: traffic from PC 1 should get at least 80% percent of the capacity of the 3g-router when both PC's are downloading. RDP traffic (tcp 3389)...

I have a cisco 1812 router with two routers (internet via two different gprs/edge routers) connected. Both are NAT routers I want to prioritize the traffic to and from one of the two local subnets/vlans local interfaces: interface FastEthernet0/0.2 encapsulation dot1Q 2 ip address 10.0.1.1...

Can someone provide some example configuration for configuration of a ios router (2600) with 2 wan interfaces (ethernet) and failover for nat? eth0 ip 83.xx.xx.1 / 24 primary wan interface (nat outside) eth1 ip 243.xx.xx.2 / 26 backup/secondary wan interface (nat outside) fastethernet0 ip...

Is it possible to monitor the type of traffic and dscp for interfaces on Catalyst 3550 switches? Something like netflow on routers... I had a Avaya C460 L3 switch earlier (different company) and used a utility to monitor traffic types and priority.. I think this utility was using SMON to do...

We have a network not unlike the one on the picture. It has 3 cisco 3550 switches with 5 subnets (one of them is voice vlan/subnet) One of the switch ports on the 24-port switch is configured as a router port. The fibre gbics "trunks" between the switches. The others are "standard" switchports...

I'm having trouble connecting to external pptp vpn servers from my LAN. I'm using a Cisco 2610XM router running IOS adventerprise 12.4.7 I know that the pptp vpn servers is working correctly. I have also tried running access-lists with "permit ip any any" on all interfaces. What can be the...

is there a free or cheap netflow tool for WINDOWS that shows a "realtime" (max 1-2 min after) statistics from "ip accounting".. So I can have one monitor showing this all the time..

I have some problems with my Cisco 2620XM router. The router is NAT-ing for a rather large network with 55 subnets.. These are all in the 10.0.x.x - 10.3.254.254 range I also have a DMZ zone (lets say 213.184.100.0 - 213.184.100.63) Lets say my public ip is 213.184.1.1 The relevant config (I...

We have recently swapped our firewall (linux + shorewall) with a Cisco router.. Everything is working fine I think (will certanly know on Tuesday when everyone come to work again), but one thing puzzles me.. My acl for lan out traffic (from dmz and internet TO the lan computers) have a deny any...

I have recently bought a Cisco 2610XM router with the latest Adventerprise IOS. I want to use this router as a gateway between my IP Telephone provider and my Cisco 7920 wireless phones. The IP telephone provider tells me that it is possible (and have been done before) to use Cisco Callmanager...

I have two aaa authentication ppp local groups: aaa authentication ppp default local aaa authentication ppp company1 local Is there a possibility to add certain users to the default group and others to the company1 group?? I'm trying to create two or more vpdn-groups for external pptp access...

some relevant configuration first... my router is a cisco 2610XM running latest advanced ent. services ios. -------------------------------------------------------- ip dhcp pool dhcp_local network 192.168.0.0 255.255.255.0 default-router 192.168.0.1 etc.. interface FastEthernet0/0.1...

I have a problem with a GRE tunnel going up and down all the time. When it is up I can reach all my resources on the external network, but when it is down I can of cource not reach them.. router1: ethernet 1/0 is the wan interface with public ip 200.200.200.2 ethernet 0/0 is the local...

I'm trying to upgrade my Cisco 7970 phone to SIP. I have the SIP files on my tftp server.. The phone is starting to load the sbn files, but download fails at 82% when downloading the apps70xxxx sbn file.. The phone was factory reset when I bought it (from Ebay) Is there an migration path I have...

I have recently upgraded my Cisco 2610XM router to advanced enterprise services IOS. I'm trying to register the router ro Asterisk (PBX), but I do nat have any luck.. I have tried "everything" from guides around the Internet.. Is there some requirements in addition to the ipvoice ios (or...

I have a running (in use) Cisco 2610XM router with 16 MB flash and 64 MB memory. I have recently aquired 16MB extra flash memory and additional 128MB memory for my router. From what I've read on several sites I have to re-partition the flash to one "big" 32MB partition for use all of the flash...

hello! I'm trying to get netbios broadcast to work over a pptp connection to a cisco 2610XM router. everything works like it should except from this.. local interface uses ip addresses 192.168.0.100-254 and the local pool for pptp users is 192.168.0.80-99 router local ip is 192.168.0.1 I use a...

I have the following scenario: I have one 1841 router with 2 FE ports. The first port is connected to a Cisco 2960 switch. the second port is connected to a standard switch (no vlans) The 2960 switch has 3 vlan's, vlan 2,3 and 4 the FE 0/1 interface on the 1841 has 3 subinterfaces that is...

I'm trying to set up a cisco 2610XM router to communicate with multiple subnets through ipsec vpn tunnels. I do not manage the remote PIX boxes myself, I only get host, groupname and password. Cisco VPN Client 4.6 connects with no problem using these credentials.. I have connected 2600-series...