Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Fault in SPS
The second SPS does not start. The navi manager shows it as not present. There are no lights on the SPS. I tried powering down and powering up and checked the cables. they seem to be fine. Is there any way to fix this. The second SPS seems to be working fine. thanks mabu -
How to? Assigning more than 1 lun to a drive
Hi, I have created a storage group and added three luns(raid5) to it of sizes - 995 gb, 212gb, 500gb. But in windows, when I check the Disk Management MMC, i can see three drives, but all these drives are of 995gb. Shouldn't I be seeing just one drive with 995+212+500 gb of space. Or should i... -
Clariion FC4500 Disk Error
Hi The manager shows that the last three disks on DAE 3 has errors. Plus the active and fault lights on the DAE for these disks are all off. Is there a way to fix this problem. Your help will be greatly appreciated Thanks. Mabu -
Disks Unreadable/Unkonwn
Hi, I am trying to configure Clariion 4500 with Navisphere manager 5.3. I have created raid groups bound luns and created storage groups. I am able to see the lun on both device manager and Disk management MMC, but the Luns appear as Unreadable and Unkown. I am not sure what I am doing wrong... -
Creating Storage group through FCLI
Hi, I was able to bind disks into luns but I think my problem is that I do not have any storage groups assigned. It would be great if someone tellme how I can do this through Fcli. Rigth now, I can see the array in through the management server but I see the whole 25terabytes and don't see... -
Fcli - Factory Default settings
Hello All, 2 questions. 1. How do I set the FC 4500 to factory default settings? 2. Is there a way to deregister a hba through fcli? Your help will be much appreciated. Thanks mabu -
Fc4700: Configuration + Initialization Help
Hello all, I was able to get to the FCLI Prompt with Maultier's Help. I used Hyperterminal with 9600-8-N-1.But I have been stuck and haven't been able to move from there. Here is what I did so far. -- Installed two Emulex HBAs on to a machine with Win 2003 and connected to the SP with... -
Setting Ip address Emc FC 4700
Hi, An emc clariion san storage device was just donated to our lab. I believe it is FC 4500 but not sure. The problem is I don't know where to start. Going through the posts, I tried to connect to one of the SP's through hyperterminal but did not get too far with it. I found some manual from...
