Hello, all,
here we have a problem with the configuration above: after connecting/pairing a bluetooth headset (Voyager legend plantronics - corect listed in the bt menue of the lip 8024) suceesfull with a lip 8024D Phone (with bluetooth adapter 8000 BTmu) we get a ringing signal on the...
Hello,.
we have an old BP 250 System, which normally worked fine; PRM. is 18,
1.now for a long period the VMU-HD caused Errors (see images maintance logs below) and then need to be restarted after 3-4 days of working stable; it seems to me, that the CPUD-5 recognize the fail funktion,try to...
Hello, all,
we want to activate/proof the UCS Desktop Client Standart/Premium (first time) on two of our Workplaces; as our vendor told us, the SW of this client was no longer supported and available ( i think ,only for UCP anymore); on our Mfim 300 it is possible, to activate 3 clients...
Hello, all
we have a few gap cordless phones (Ericsson dt412) in the dect Area af our Mfim 50b, which work o.k.; call transfer from this phones to annother cordless (even gdc handsets) den´t work, because r-button funktion seems to be not compatible with Mfim code;I have try t get a keypad...
Hello, all
we want to delete 2 ip stations ( had been registered, but now no more in use and disconneted) in our 50b System, because of getting free ports in the system; is there any easy (right) way or workarraund, to prevent, that the the sequence of stations and numbers is moving (the 2...
Hello, all,
have a problem with programming in a bp 128; have unchecked system cmd 2080 in bms ( free on 2 line) , but get a free line tone, not a busy tone, when a second call comes to "busy" extensions; is there something more
to do in the trunks ?;
thanks a lot for all hints.
Hello, all
i want to get all incoming extern calls on head number 12345 -"0" landing on one extension with possibility of caller list; , but not operator; because (i think), caller list cannot be activated for operator extension in BP 128/250; ; i have try , to use a dbc 4223 acitivated as...
Hello all,
having problem with connecting a ericsson dialog 3413 ip extension to bp250;
this is, what is done: ipu with license + dsm on board; basic license 14/1, networking enabled
ipu has given static ip in the local lan (cmd 2152), given same ip for the h323 gateway (cmd 2181);
subnet +...
Hello, all
short question to upgrade process above: at which time i had to work with the override telnet command procedere (to prepare for upgrade to 6.0 and above): after 5.5 or must i go first to 5.6 gz? There are different advise to the theme.
At this moment we got vers. GS96 5.5.Fc, Kernel...
Once more: Please can someone help with the discribed situation in thread 1613-1785286;
a situation with Mfim networking voice + lan conection between A + B location in same Town works o.k.; transit out co line (with dialing 84-0) works for location A (Mfim 50b) , which then use the pstn acess(...
Hello,
can someone help with SW, FW,.. update files to a Mfim 100, (i think first to v5.6, then override command procedure, and then to v6.0 or v6,1)- was this correct ?
the Mfim has has the following v:
MFIM GS 95M E-5Gj Dec 11
Boot Version 1.0 Bf May 10
Kernel Version 5.5 Dd
HW issue 2...
Please can someone help with the discribed situation in thread 1613-1785286;
a situation with Mfim networking voice + lan conection between A + B location in same Town works o.k.; transit out co line (with 84-0) works for location A (Mfim 50b) , which then use the pstn acess( Mfim 300...
Hello, all
some last Problems in our system:
1. a working, linked (by networking) System of a Mfim 50b with a Mfim 300; the mfim 50 use co lines from the mfim 300 over voip;to get this transit co line, we have to dial at the Mfim 50b stations: 84-0 and then a following complete number; i.e...
Hello all,
i need help with o.a. discribed problem; when connecting direct on a wtim4 (works in a system with Mfim 50b, see thread before) and try to set ip adress of gateway in "lan settings" there, after reset the gateway has not capture the value (was back to 0.0.0.0); setting of subnet mask...
Hi all,
having problems with the dect solution on a mfim 50b; this is what is programmed; a mixed number of working digital, analog and ip stations ( from max. 50 ports 48 are used ) ; for the dect solution a wtim4 gateway is registered at the mfim and running; for testing this , i have...
there is one more new problem for me: we add a dtim8 also in a working 50b system; i have done this, the gateway is registered in web interface(via pgm 101, the gateay is vissible, and unter column "type" " it is shown in blue text, (which i can click, and a menue "station" appears with the 8...
hello, all
need help for reconstruct a analog bp 50 situation to an ipecs mfim 50b (SLTM4 gateway is concected/registered, terminal numbers are already defined) This is what exists on a Ericsson BP 50:
4 small analog pbx groups( with different ringing sequence to the terminals ), which...
Hello,
we have got a used, older callserver ipecs Mfim 300, which should work for us; , it is coming with SW/FW GS 5.0 (HW code 2); can anyone help with update files for 5.5 ; is it correct, that update to 6.0 needs a procedure with a so called override command before?
thanks for all!
Martin
thread1613-1717661
Hello, all
can someone explain, how the procedure for recovering Mfim 50b (boot and kernel files) works; i know, this normally is only possible for a LG reseller, files are not available for user ? ; is there a chance , to do it by myself ? what will be necesarry ?
If i...
Hello,
have try to upgrade LIK 50b from 5.0 to 6.0 ; after uplode kernel.rom file succesful mfim asked for restart; at that time the second (appl. file) was not load up; after restart mfimm does not boot up anymore; all 8 leds are on without flicker after power up; web interface had suddenly...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.