Search results for query: *

I have a Lexmark XM3150 and I am trying to connect it to an IP500 9.0 and I keep getting the same error. Has anyone seen this? 15:41:30 694028215mS SIP Rx: UDP 192.168.10.173:5060 -> 192.168.10.3:5060 REGISTER sip:192.168.10.3 SIP/2.0 Route...

I have a situation where I have configured approximately 6 data switches in different closets with 3 separate Vlans. 1=Data, 15= Voice, and 16= Video. I can't seem to get he Voice vlan to work at all. Data is flying. The phones will come up and ask for an extension, them boom (discover...

I have a customer that wants certain phones to dial an internal extension if the phone is off hook for too long. Kind of a safety feature. They currently are doing this on a old Rolm switch and we are replacing with an IP500V2 running 8.0 (44) software and 95xx phones. Anyone have a clue if...

So I have modified a screensaver file for phones and I am able to make it work pretty easily on 9641 sets. However, the 9608 sets are not displaying the new screensaver. They continue to show the default One X. While the phone is loading it seems to try to grab the new file. Anyone had any...

Does anyone know where I can find this? I have misplaced my disc and just need to reload on a new machine.

I just installed a new Mitel HX Controller at a site that had an old Inter-tel. The customer did not replace the sets, so we have a mixture of 4xxx series sets. I cannot seem to make the phones do voice announce calls. I have used the feature 319 code toggling the Handsfree mode off and on to...

Looking for some good test questions to this exam to prepare for it. if you have anything good please let me know jbrownatgotocidotcom Thanks

Though I know that IPO and voicemail only support up to 500 users, I still question if anyone has ever pushed it beyond this limit and if so how many?

I am being told by my Avaya rep that they have gotten a 4690 IP phone working on the IP500 without an IP endpoint license. Does anyone have any experience with this? Thanks.

I have new IP500's on point to point wireless. R4.2(14) Calling out the main site on the PRI the Caller ID passes fine. If I call out the remote site across the SCN the Caller ID gets stripped and replaced with the main number of the PRI for billing purposes. Anyone had experience with this...

The Release 5.0 Field Trial program is due to begin in April 20th 2009 and concludes July 2009 for GA Release August 3rd 2009. Release 5.0 will introduce two new components to IP Office: "one-X Portal for IP Office" and "Unified DECT". Version 5.0 also has new features and enhancements. Some of...

Has anyone done this and if so, do you know of any documentation to do it?

Refering back to this thread, thread940-1361610. I have a question with the MVP-130. I know this is to be used for the communications manager only. The scenario is as follows: IP500 on one end tied together with a point to point T-1. I am running all IP sets at the remote end and they want to...

We have a customer that will not allow us to put the ECAS on their LAN. They had a Definity with ECAS on serial port and replaced with the IPO. Is there any way to hook up ECAS to IP 500 without using the LAN?

This could be a long one. Magix R2.1 tied to and IPO 3.2(54) 406V2, via a PtoP in the same room (crossover cable). Currently I have this setup as a PRI going 5ess on the IPO side and Magix-PBX and the Magix side. The IPO has a PRI from the LEC coming into it and the other of course going to...

I have a custmomer with a T1 networked to another location. They dial a trunk access code and are able to dial extensions off of the other switch. Problem that I have is when someone from the other location dials an extension at my customers office when the system is in Night Service, the...

I have a magix 4.0 that has the extension showing when you call internally instead of the name. This is only happening on 5 out of 50 users and I see nothing different when comparing the extensions to each other on a print out in WinSPM. Anyone know what I might be missing here?

IP 406 V2 3.2(57) Phone Manager Tried them all. Problem is when you try an assisted transfer, you have to hit transfer, extension number, pick the call back up hit transfer, extension number, transfer and the call goes through. You can do blind transfers and voicemail just fine. Also you can...

I have a 406V2 R4.0.7 that just rebooted and the error I am getting is this. Anyone got a clue? Date: 7/24/2007 9:48:35 Reason: Abnormal Termination Termination Cause: <TLB Instr> addr=ff27fb98 d=0 pc=00000000

I have embedded mail on multiple IP500's and one IP406V2. All are the newest releases and the voicemail just stops for no reason. Sometimes in a day sometimes in a couple hours. Has anyone else experienced this?