Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. NettableWalker

    QoS ACL- Maximum Length?

    Hi, We are using a standard setup which matches a QoS policy-map against Class-Maps using an ACL for certain types of traffic. We then DSCP mark this traffic on Egress and use WRED and CBWFQ. for example: access-list 101 permit tcp any any eq 3200 access-list 101 permit tcp any any eq 3600...
  2. NettableWalker

    relative latencies of client vs site to site

    Is there a general feeling about the relative latencies and performance between site to site connectivity using a site to site VPN or using a Cisco VPN Client and a 3000 concentrator? Would the Client method be an accurate way to simulate the latency that we would expect to see if we configured...
  3. NettableWalker

    OSPF Peering across multiple VLANs

    What is the best practice for controlling adjacencies between multilayer switches with multiple VLANs. I have a LAN to explore that has several 6500's, none of them using Passive-interface so the Show IP OSPF Neighbors shows many adjacencies. Is this a problem, or something that is best...
  4. NettableWalker

    Doing 642.642 at end of the month.

    I'm ramping up to do the QoS exam at the end of this month. I was studying BGP then got sidetracked by work/life so started the CCIP again on QoS.(it's much easier i reckon) I'm reading the Wendell Odom Book cover to cover. Has anyone else done the QoS? What's it like? any other good resources?
  5. NettableWalker

    Loopback address broadcasting??!?!?!

    I've had a stange one. An ISDN line kept coming up hundreds of times, tests showed that the interesting traffic was from the loopback address to 255.255.255.255 Adding a deny line to the ACL stopped this happening, but why oh why should a loopback address broadcast anything? No services were...
  6. NettableWalker

    Starting CCIP

    Hi Everyone, I finished my CCNP over a year ago and i've been feeling the need to move a step closer to the magical holy grail of CCIE. I've just begun CCIP study as I reckon these topics are totally necessary to master before CCIE. Does anyone have a link or any hints to where I could get the...
  7. NettableWalker

    What does this routing command mean?

    Hi, I have a load of 6509's running the OSPF routing in my new job: a large 3500 user LAN. There are a few static routes on each as follows: IP Route 10.0.0.0 255.255.255.0 VLAN 112 xx.xx.xx.xx etc what is the significance of the VLAN statement in the command? i have never seen this before.
  8. NettableWalker

    Bridging 2 VTP domains

    Hi everyone, Is there an accepted way to bridge a VLAN across two or more VTP domains? We have 3 separate factories on a large site each with its own VTP domain, there is one VLAN for contractor internet access that needs to be carried across the whole site into the first datacentre and to the...
  9. NettableWalker

    What's a good one after CCNP?

    I'm bored. I finished my CCNP 4 months ago, I learnt a huge amount of very interesting stuff and now i want to pick up another pile of textbooks and start again. I've looked at the job market and it seems that CCNP jobs don't pay huge amounts these days. So i could stay where i am for a while...
  10. NettableWalker

    QoS confusion...

    I am trying to implement QoS (CBWFQ) on my main internet router. I've set up 4 different classes and allocated bandwidth etc but i only seem to get results from 2 of the queues. I need all my Citrix traffic to take priority, then Me!, then bit torrent stuff is cut right down to 8Kbps, and the...
  11. NettableWalker

    switch default gateway

    Hi everyone, I have a bit of a mental block about this: What should you use as the default gateway for a switch such as a 2960? does it really matter? is it neceesary anyway? Currently i use the VLAN1 interface of my main 3560 multilayer switch (eg 10.1.0.10) , or the VLAN100 (which is the...
  12. NettableWalker

    headaches?

    Last night i sat with my Cisco 877W on one side and a 1231AP on the other sdie of me configuring them for about 3 hours. I went to bed with a serious headache and very dizzy. Does anyone else notice "stuff" from proximity to wireless? MCP,CCA,CCNA,CCNP,Net+.
  13. NettableWalker

    AAA problem with PPP

    I use the following AAA setup on all my routers etc with no problems. But on a couple of 837 DSL routers it refuses to PPP authenticate because of the AAA. if i remove the AAA it works instantly. What am i doing wrong? How can i get around this? The PPP debug output is at the bottom. Thanks in...
  14. NettableWalker

    Wireless Bridge and Wireless Router?

    I have a 877W DSL wireless router using WPA-PSK authentication, it all works fine for any client. I also have a 1230 Access Point that I need to configure as a workgroup bridge to wirelessly link my outside office to the rest of my LAN. Is it possible to get an AP to link to a router or does...
  15. NettableWalker

    Multilayer switching and routing issues

    Hi Everyone, I've got a badly behaving LAN. Please help as i think i've got things confused. I've got about 10 2960 access switches connected with about 3 3560's as distribution switches. My 3560-G is the only one set to use IP routing (with OSPF- this works ok on all the other routers etc and...
  16. NettableWalker

    Passed BSCI, got a CCNP!

    Hi Everyone, I've finally finished the months of hard slog and passed the BSCI to finish my CCNP. For those still to take the exam: It was loads of BGP, far more ISIS than I would have thought, and a fair amount of route redistribution, bit of IPv6, EIGRP feasible successors, OSPF stub areas...
  17. NettableWalker

    Cannot get back in on same interface

    Hi Everyone, I've got a silly little problem that i am sure there is an easy answer to: My users cannot get remote access such as Citrix or Outlook web access from inside the company. Their default gateway is also the input IP address for all remote access. It is as if the edge router will not...
  18. NettableWalker

    remote homeworkers, VPN and OSPF

    Hi Everyone, I need to set up about 10 home workers with IPSEC VPNs to HQ, this is the easy bit. But what is the best practice for routing protocols? We use OSPF within the enterprise, is it best to set up each connection as a new OSPF area and configure it as a stub? Or is is best left as Area...
  19. NettableWalker

    wireless certification

    What's the best Wireless course and/or certification? Is it best to stay with Cisco? or is a CWNA any good? does a CWNA cover Cisco's implementations? Any other info would be gratefully received. Thanks. MCP,CCA,CCNA, Net+, Half CCNP...
  20. NettableWalker

    Anyone done CIT?

    Hi Everyone, Has anyone here done the CIT exam in the recent past? I've got it next week and don't know what to expect. Is it just a mixture of the other 3 subjects or is it all troubleshooting questions? How best would you revise for it? Many thanks. MCP,CCA,CCNA, Net+, Half CCNP...

Part and Inventory Search

Back
Top