Hi!
When I use xp_sendmail I find problem below:
SELECT @sumstr = 'SELECT SUM (fee) FROM FeeTable WHERE...'
EXEC (@sumstr)
IF @@ROWCOUNT > 0
EXEC master..xp_sendmail @recipients = @recipient,
@message = @sumstr,
@query = @sumstr,
@attachments = 'Result.txt'...
Hi, all:
I have a BayStack 450 switch,
the system information is :
sysDescr: BayStack 450-24T HW:RevB FW:V1.48 SW:v4.1.0.6 ISVN:2
I use a HP SNMP++ Browser (version 2.0) to get some SNMP information from that switch,
when I use oid = 1.3.6.1.2.1.17.4.3.1.2.+MacAddress to get switch port...
hi!
I have one data port in the working room, and I have to make three computers to use this data port to connect to Internet.
I use a 2948-L3.
All the ports were assigned to the same vlan(no ip address), and they can communicate with each other, but the uplink to the data port was fail.
How...
I added a Vlan to my 5509 Switch,
but the vlan status is always as "vlan is down, line protocol is down" ?
How can I do to make it up?
Thanks!
Hi, all
I get following messages when I try to backup files from tape:
% tar xvf /dev/rmt/0
tar: blocksize = 0
When I try to run mt it appeared:
%mt -f /dev/rmt/0 fsf 1
/dev/rmt/0 failed: I/O error.
I have no idea with that, so need your help very much!
Hi,
I have two network adapers in my Ultra60.
Both of them are 10/100M.
To meet the needs of network traffic, I want to use them two as one network adapter, so that there will be a bandwidth of 200M of my server.
Who can tell me how to do this?
Hi,
Once my system (solaris 7) was shut down abnormal,
there always be no response before the CDE login interface appears.
Please give me some advice.
Yuan
Hi,
Who can tell me how to give a common user the permission to some system administraion tool such as "useradd" ,"fsck".
It seems that use chmod only does not work.
I can not manage the netscreen firewall from trust and untrust interface using telnet and web, but all the policies still take effect,
the config as follows:
set interface trust telnet
set interface untrust telnet
set interface trust web
set interface untrust web
set admin sys-ip 0.0.0.0
I...
I can not manage the netscreen firewall from trust and untrust interface using telnet and web, but all the policies still take effect,
the config as follows:
set interface trust telnet
set interface untrust telnet
set interface trust web
set interface untrust web
set admin sys-ip 0.0.0.0
I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.